H812R7BYA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are composed of a conductive material that forms a core for the electrical components, typically two, that form the electrical circuit between them called a resistor. H812R7BYA through hole resistors are commonly used in industrial and commercial applications to measure and control the flow of electricity. This type of resistor is designed to function as a voltage or current limiter to prevent any dangerous overloads or currents.

The H812R7BYA is a 3-pin component, meaning that it has three metal pins referred to as the leads that are used to make physical contact with and provide electrical paths between other components. Typically, the two inner pins are the resistors, while the outer pin is typically a heat sink for dissipating excess heat generated from the resistor’s operation.

The resistance value of the H812R7BYA is 12kΩ±5%, and the rated power is 0.75W. It is designed to be used in a wide variety of electrical circuits and is common in machines such as educational robots, circuit training systems, and display boards that require a fine-tuning of the electrical flow.

The H812R7BYA is designed to be easily integrated into electrical circuits via its three leads. The two inner pins connect to either side of the circuit to create an electrical path for the current to travel, while the outer pin connects to a heat sink, allowing any excess heat to dissipate properly. This helps to ensure that the resistor does not overheat and cause damage to the other components in the circuit.

The H812R7BYA works on the principle of electrical resistivity. This is a property of all materials which describes the opposition to any electrical current conducted through them. In this case, the resistor is designed to limit the flow of electricity in the circuit, in order to prevent any dangerous overloads or currents. This is done by a process of conversion of electrical energy to heat energy.

The resistor is designed to provide an impedance between two points in the circuit. This means that it reduces the amount of current flowing through the circuit, ensuring that it does not exceed the desired voltage or current levels. The resistance of the resistor is determined by the ratio of its length to its cross-sectional area, and the H812R7BYA is designed to have a resistance of 12kΩ which allows an appropriate voltage or current to be produced across the circuit.

While the resistor does not directly convert energy from electrical to heat, it is still responsible for producing a lot of heat. As such, the outer pin of the H812R7BYA needs to be connected to a heat sink in order to dissipate any excess heat that is generated, preventing it from overheating and damaging the other components in the circuit.

The H812R7BYA through hole resistor is designed to be extremely reliable and provide accurate and consistent electrical current control. Its resistance value is precisely controlled in order to ensure that undesirable overloads or surges are prevented while allowing the electrical current to flow at a precise and safe level. This makes it perfect for applications that require fine tuning of the electrical flow, such as educational robots, circuit training systems, and display boards.

The specific data is subject to PDF, and the above content is for reference