H8137RBZA

Series:	Holco, Holsworthy
Packaging:	Bulk
Part Status:	Active
Resistance:	137 Ohms
Tolerance:	±0.1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Pulse Withstanding
Temperature Coefficient:	±100ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.283" L (2.50mm x 7.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

H8137RBZA Through Hole Resistors: Applications and Working PrincipleThrough hole resistors are sandwiched between two pieces of conductive metal and are designed to modify the flow of electrical charge through a circuit. H8137RBZA through hole resistors are one of the most common and simple components used in electronics. They can be used in a wide variety of applications, with different levels of success depending on their specific characteristics and practical design features.ApplicationsHD8137RBZA through hole resistors are commonly used in circuits as either a way to limit current, to reduce voltage levels, or to provide electrical field resistance. They are also often integrated into various electronic circuits in order to provide thermal, magnetic, capacitive, or inductive properties.For example, through hole resistors are used in power supplies, voltage dividers, amplifiers, and motors. They are also used as temperature sensors, in audio applications, and to provide temperature compensation for integrated circuits.Working PrincipleThe two ends of a H8137RBZA through hole resistor are connected to each other by an oxide film which acts as an electrical insulator. When voltage is applied to the resistor, an electrical current flows through the oxide creating an electrical field inside it. The size of the electric field depends on the voltage applied.As the current increases, the electric field strength increases, thus increasing the resistance of the device. This is known as ohmic resistance or Ohm\'s law. The total resistance of the device can be calculated by multiplying the applied voltage by the length of the resistor.By varying the applied voltage and the size of the resistor, different levels of resistance can be achieved. In electrical engineering, the desired resistance can also be achieved by using a combination of different types of resistors.ConclusionH8137RBZA through hole resistors offer a range of possibilities in circuits and can be used to modify or limit the flow of electric current. They offer both temperature and voltage sensing capabilities, and also provide thermal, magnetic, capacitive, or inductive properties. Their simplicity makes them one of the most commonly used resistors in electronic circuits.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description