H81K4DCA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are electronic components that are designed to provide resistance in electronic circuits. They are also called through-hole resistors because they are mounted in a circuit board via a hole drilled into the board, and the resistor body extends through the hole. H81K4DCA is one type of through hole resistor.

H81K4DCA is an axially leaded resistor with rated power of 0.25 watts, lead length of 3.45mm and a tolerance of ±5%. The basic structure of H81K4DCA consists of a small ceramic cylinder or disc that is embedded in a ceramic material, with two metal wires passing through the center of the cylinder. The metal wires are made of a material such as copper or aluminum, and they are connected to the ceramic cylinder on each end. This forms the basic structure of the resistor. The size of the cylinder is determined by the value of resistance desired for the resistor.

H81K4DCA is most commonly used in applications that require a high degree of accuracy. It can be used in voltage regulation circuits, current limiting, signal conditioning and other applications that require precise and accurate levels of resistance. It is also very reliable and has a longer lifetime than other types of resistors.

To use the H81K4DCA, it must first be attached to a circuit board. This is typically done by drilling a hole in the board and then inserting the resistor body through the hole. The board is then secured with solder to make sure the resistor is properly attached. Once the resistor is attached, the leads coming from the bottom of the resistor body should be connected to the appropriate points on the circuit board. The two wires should be connected to two separate circuits, with the negative lead connecting to the ground and the positive lead connecting to the circuit\'s power supply.

The working principle of H81K4DCA is based on the basic principle of electrical resistance. When an electrical current passes through the resistor, it encounters a certain amount of resistance, which then sets the amount of current passing through it. This resistance is determined by the size of the ceramic cylinder. The resistance increases as the ceramic cylinder gets larger, and vice versa.

In conclusion, H81K4DCA is a versatile and reliable type of through hole resistor that can be used in a variety of applications. It is most commonly used in applications that require a high degree of accuracy and reliability. The resistor is easy to install and use in circuit boards and has a longer lifetime than other types of resistors. Its working principle is based on the resistance encountered by the current passing through the resistor, which is determined by the size of the ceramic cylinder.

The specific data is subject to PDF, and the above content is for reference