H83K16BYA

Series:	Holco, Holsworthy
Packaging:	Bulk
Part Status:	Active
Resistance:	3.16 kOhms
Tolerance:	±0.1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Pulse Withstanding
Temperature Coefficient:	±15ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.098" Dia x 0.283" L (2.50mm x 7.20mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors (or THRs) are the most common type of resistor. They are composed of two parts, a body and a lead. The body is usually made of ceramic or metal and has two metal contacts, or leads, on either side. The resistor is connected by electrical wires to the contacts on either side, and the current flowing through it is regulated by the material that makes up the body.The H83K16BYA is a through-hole resistor manufactured by Honeywell. It has a resistance value of 16 ohms and is rated for a maximum power of 32 watts. It has a Tolerance of ±5%, and the temperature coefficient (DTC) is -50 to 150 ppm/K. It can be used in a variety of applications, including in motor control modules, power converters, automotive and low-level audio systems, and industrial applications. The H83K16BYA works on the principle of Ohm’s Law. The current flowing through the resistor is governed by the voltage applied across it. The current is proportional to the voltage applied, with the resistor acting as a circuit element that limits the current flow. The current through the resistor is equal to the voltage level multiplied by the resistance value of the resistor (I = V/R). For the H83K16BYA, the maximum current it can handle is determined by the absolute maximum power rating (32W). The maximum voltage required across the resistor is calculated by dividing the absolute maximum power rating by the resistance value of the resistor (V = P/R), which comes to 2 volts in this case. It should be noted that this is the absolute maximum voltage, and going over this value can cause permanent damage to the resistor. The H83K16BYA is rated for a temperature coefficient (DTC) of -50 to 150 ppm/K which means that it will change its resistance value by -50 to 150 Parts Per Million (PPM) for each degree Celsius increase in temperature. This change in resistance is caused by the thermoelectric effect in the resistor which makes it an effective temperature sensor when combined with an ADC. The H83K16BYA through-hole resistor is a highly reliable, cost-effective component. It can be used in a variety of applications and is capable of withstanding high temperatures and power levels. It is a very reliable component due to its temperature coefficient and can be used in a variety of arduous environments.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description