H882K5BBA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

H882K5BBA through hole resistors are widely used in various circuits for current-limiting and voltage-dividing purposes. These resistors are cylindrical in shape and have a hole drilled in the center to easily fit into a printed circuit board (PCB). This hole also adds mechanical strength and stability to the resistor. These resistors are composed of two terminals, an external resistive layer and a lead/terminal base.

The H882K5BBA through hole resistors are usually rated for up to 500 watts of power with maximum wattages typically ranging between 3 to 24 watts depending on part type. The resistance range is typically between 1 ohms and 22 megohms. The ceramic body of the resistor acts as an insulator, thereby protecting the resistive layer from electrical shorts. The lead wires of these resistors are typically made of copper or nickel-iron alloys. The lead wires should be connected to the PCB using soldering or spot welding.

The working principle of a H882K5BBA through hole resistor is that current flows through the resistive layer and is limited or reduced according to the value of the resistor. The voltage drop across the resistor is proportional to the current flow. The amount of current that flows through the resistor is determined by the applied voltage and the resistance value. In effect, the resistor acts as a voltage divider, which divides the applied voltage into two parts; one part is the voltage drop across the resistor and the other part is the output voltage.

These resistors are widely used in power supplies, amplifiers, oscillators, audio and video systems, control systems, computers, automotive electronics, and telecommunications applications. Some applications include voltage regulation, voltage convertors, timing circuits, motor speed control, signal processing, surge protection, noise reduction, current sensing, and voltage smoothing. H882K5BBA through resistors are an ideal choice for these types of applications due to their small size, high power rating, reliable performance, and wide range of resistance values.

The H882K5BBA through hole resistors are typically made from ceramic bodies with copper, nickel-iron alloys, or other conductive materials used as the resistive layer. The body of the resistor provides mechanical strength and stability while also acting as a thermal barrier to prevent heat damage. These resistors are usually soldered to the PC board using either solder or spot welding. The leads should be properly positioned and soldered to ensure proper connection and stability. Proper handling and installation of these resistors is critical to their performance and reliability.

The specific data is subject to PDF, and the above content is for reference