Allicdata Part #: | 513-1109-2-ND |
Manufacturer Part#: |
HC8-1R2-R |
Price: | $ 1.57 |
Product Category: | Inductors, Coils, Chokes |
Manufacturer: | Eaton |
Short Description: | FIXED IND 1.2UH 16A 4.7 MOHM SMD |
More Detail: | 1.2µH Unshielded Wirewound Inductor 16A 4.7 mOhm M... |
DataSheet: | HC8-1R2-R Datasheet/PDF |
Quantity: | 1000 |
800 +: | $ 1.42081 |
DC Resistance (DCR): | 4.7 mOhm Max |
Height - Seated (Max): | 0.157" (4.00mm) |
Size / Dimension: | 0.429" L x 0.409" W (10.90mm x 10.40mm) |
Supplier Device Package: | -- |
Package / Case: | Nonstandard |
Mounting Type: | Surface Mount |
Inductance Frequency - Test: | 100kHz |
Operating Temperature: | -40°C ~ 155°C |
Ratings: | -- |
Frequency - Self Resonant: | -- |
Q @ Freq: | -- |
Series: | HC8 |
Shielding: | Unshielded |
Current - Saturation: | 25.5A |
Current Rating: | 16A |
Tolerance: | ±20% |
Inductance: | 1.2µH |
Material - Core: | Iron Powder |
Type: | Wirewound |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fixed Inductors are commonly used in electronic circuits, and one such inductor is the HC8-1R2-R inductor. This inductor is made up of wound copper wire with ferrite cores and encased in a plastic housing. It provides several benefits, including high current carrying capacity, low operating frequency, low self-resonance frequency, high resistance to high energy pulses like those caused by lightning, and good linearity.
The main purpose of the HC8-1R2-R inductor is to store energy in the form of a magnetic field, which can be used to regulate and dictate the flow of current in various types of circuits. It is typically used in switching power applications, where it is used to allow high frequency current through the circuit while preventing large amounts of current from flowing. In this way, it helps to control the operation of the circuit and provide efficient power output.
The inductor consists of a single wire wound onto a ferrite core. When current is passed through the wire, a magnetic field is created around the wire, which stores the energy. When the current is stopped, the stored energy is released back into the system. This stored energy is then used to regulate the flow of current in the circuit.
The HC8-1R2-R inductor is popular in switch mode power supplies, where it is frequently used to increase the power frequency of signals entering the circuit, enabling the power supply to operate at its maximum efficiency. By increasing the frequency of the signal, the power supply can effectively control its output power. The inductor also helps to reduce crosstalk or interference from adjacent circuits.
In addition, the HC8-1R2-R inductor is used in other types of systems such as modems, radios, televisions, amplifiers, and antennas. It is also used in communications systems where it regulates the signal strength and frequency, allowing for increased communication speeds and better reception. In automotive applications, the inductor is frequently used in vehicles with multiple motors and systems to help control the flow of current to each of the different components.
While the HC8-1R2-R inductor is a useful tool for controlling power signals in various circuits, it is important to note that not all inductors are created equal. Different inductors have different operating frequencies and current capacities, and depending on the application, should be selected accordingly. Care should also be taken to select the appropriate properties for the inductor for the specific application to ensure that it will work properly and provide the desired results.
The specific data is subject to PDF, and the above content is for reference
FIXED IND 10UH 590MA 350 MOHM10H Unshiel...
FIXED IND 22NH 1.4A 70 MOHM SMD22nH Unsh...
FIXED IND 13NH 600MA SMD13nH Unshielded ...
FIXED IND 680UH 210MA 4.6 OHM680H Unshie...
FIXED IND 470UH 1.3A 280 MOHM TH470H Uns...
FIXED IND 8.2UH 165MA 2.2 OHM TH8.2H Uns...