HCM1707-150-R

DC Resistance (DCR):	15.5 mOhm Max
Height - Seated (Max):	0.276" (7.00mm)
Size / Dimension:	0.677" L x 0.663" W (17.20mm x 16.85mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	HCM1707
Shielding:	Shielded
Current - Saturation:	13A
Current Rating:	12A
Tolerance:	±20%
Inductance:	15µH
Material - Core:	Iron Powder
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are elements which use the inductance of a winding wire in order to provide a specific amount of energy storage over a particular frequency range. Often made up of coil, core and one or more electrical contacts, the main purpose of the fixed inductor is to limit the amount of current in a circuit. HCM1707-150-R is one of the types of fixed inductors.
HCM1707-150-R has a variety of applications. For example, it is used in circuits to limit the amount of current passing through it, create filters in a variety of applications, and also in energy storage circuits for frequency applications. It can also be used to store energy for radio frequency, optical frequency, and audio frequency applications.
Generally, fixed inductors like the HCM1707-150-R are made up of a core, usually ferrite or powdered iron, wrapped with one or more turns of winding wire, and a few electrical contacts. The core of the inductor does not carry any current, but rather provides a path for the magnetic field to flow through. The winding wire carries the current passing through the inductor, and is usually either made of copper or aluminum. The electrical contacts of this inductor are usually made of brass or copper, and provide a connection point for the current to pass through.
The working principle of the HCM1707-150-R is based on the basic laws of electromagnetic induction. When a current passes through the winding wire, it creates a magnetic field around the coil. This magnetic field then induces a current into the core, resulting in a magnetic field around the core. The mutual interaction of these two fields creates a steady state, which is used to store energy.
The amount of energy stored in the inductor is determined by the number of turns in the winding wire, the magnetic flux density, and the amount of current that is passing through it. The inductance of this type of inductor is also determined by the total cross-sectional area of the core, and the length of the windings. As the length of the windings increase, the inductance also increases, and vice versa.
The HCM1707-150-R inductor is a cost-effective and reliable way to limit the amount of current passing through it, in applications where a higher power rating is not necessary. It can be used for a wide range of applications, such as in energy storage circuits, signal filtration, voltage regulation, and radio frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description