HDH-00803GHD(31)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An RF directional coupler is a type of electrical device used in radio frequency (RF) systems to measure and redirect the power of an incoming signal along a separate path. This type of coupler is often used to redirect part of a signal to other components in the system such as meters, amplifiers, modulators or detectors. The HDH-00803GHD (31) is a type of RF directional coupler that can be used in various applications and has a simple working principle.

This type of RF directional coupler can be used in applications such as cellular technology, radio networks, radio astronomy, and multimedia broadcasting. By using a directional coupler, a signal can be sent in a certain direction, allowing signals to be redirected to specific components. This type of coupler is also used to measure and monitor the power and output levels of radiation in an RF system. It is typically used to redirect a portion of a signal in order to achieve desired signal parameters.

The HDH-00803GHD (31) works by using a four-port network, consisting of input, output, coupled and reference ports. This coupler is designed to measure the power of the input signal, which is fed from the input port. The input port is then connected to the output port, which is used to route the signal to another part of the system. The coupled port on the other side is used to measure the amount and the direction of the input signal. It is also used to measure the coupling factor, which is the ratio between the input power and the signal power that is redirected to the coupled port.

The reference port on the HDH-00803GHD (31) is used to measure the reflection power. This is done by comparing the power measurement between the input and reference ports. The reference port also acts as a ground for the coupler, so that any measurements taken with the device are accurate and consistent. In addition, the reference port can be adjusted in order to adjust the coupling factor of the device.

The working principle of the HDH-00803GHD (31) involves using the four-port network to measure and redirect the power of the input signal. This coupler is designed to measure the power of the input signal and then redirect a portion of it to the output, and measure the power that is redirected to the coupled port. It is then possible to adjust the coupling factor in order to achieve desired output parameters. The reference port also provides a ground for the measurement, which ensures accuracy and consistency of the measurements.

The HDH-00803GHD (31) is a type of RF directional coupler that can be used in various application fields. It uses a four-port network to measure the power and redirect a portion of the signal. This allows signals to be sent in a specific direction and measured for output parameters. The reference port also provides a ground for accurate and consistent measurements. This type of coupler is used in many different applications, such as cellular technology, radio networks, radio astronomy, and multimedia broadcasting.

The specific data is subject to PDF, and the above content is for reference