HEB-KW-RYC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An important piece of safety equipment installed in homes, industrial plants and commercial buildings is a fuseholder. A fuseholder is an enclosure that houses a fuse, and is used to protect circuits from overloads and short circuits. Fuseholders are rated at specific current limits and designed to safely contain and protect the fuse. They are generally used with single-phase alternating current (AC) circuits.There are several types of fuseholders, and the type that is best suited for a given application depends on factors such as the type of fuse, the current load and the type of application. One of the most common fuseholders is the HEB-KW-RYC. This type of fuseholder has a ceramic body and is typically used for circuit protection in applications with ratings below 600 volts.The HEB-KW-RYC fuseholder is designed to hold one fuse. The contacts are made of brass and silver and are specially designed to ensure reliable electrical performance. The fuseholder itself is sealed for weather protection and dust-proofing. The terminals are also slightly bent upward, allowing for easy connection to the wire.The working principle of the HEB-KW-RYC fuseholder is simple. It acts as a gatekeeper, protecting the circuit from overloads and short circuits by disconnecting the circuit when the current load exceeds its limit. In the event of an overload, the end caps of the fuseholder open up, allowing the fuse to "blow" and break the circuit. The internal components of the fuseholder act like the switch of a circuit breaker, automatically disconnecting the circuit when the current overload is detected.The HEB-KW-RYC fuseholder is suitable for a range of applications, such as circuit protection on circuits with a current rating of up to 600 volts, or protection of motors and fittings from overloads and short circuits. It is also suitable for use in load centers, distribution boards, switchgear assemblies and other similar electrical installations.In summary, the HEB-KW-RYC fuseholder is an important safety device. It is designed to protect circuits from overloads and short circuits, and is suitable for use in a range of applications. The fuseholder is made of ceramic material, and the contacts are made of brass and silver for reliable performance. The terminals are slightly bent for easy connection. Once the current overload is detected, the end caps open up, and the fuse will "blow", thus disconnecting the circuit.

The specific data is subject to PDF, and the above content is for reference