HEDS-5500#E02

Series:	HEDS
Part Status:	Active
Encoder Type:	Optical
Output Type:	Quadrature (Incremental)
Pulses per Revolution:	200
Voltage - Supply:	5V
Actuator Type:	3mm Open Center
Detent:	No
Built in Switch:	No
Mounting Type:	Chassis Mount, Motors
Orientation:	Vertical
Termination Style:	Terminal Pins
Rotational Life (Cycles Min):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders and the HEDS-5500#E02

Encoders are devices that measure physical quantities such as position, speed, and acceleration, and convert them into a digital form, usually a series of bits. This type of technology is used in a variety of applications, from motorized items to industrial automation and robotics. The HEDS-5500#E02 is a particular type of encoder used for measuring position and linearity. It can be used in industry-standard applications, as well as in more sophisticated applications like robotics and medical equipment.The HEDS-5500#E02 encoder is a DC-operated rotary encoder that has an output pin arrangement of two rows of four pins. It also has an absolute sensing range of up to 12 bit resolution. The encoder\'s resolution is determined by the number of pulses produced per revolution. The resolution of this encoder can range from 0.25 pulses per revolution up to 8192 pulses per revolution.The encoder has a variety of features, including a specified Hysteresis, which ensures that the encoder is capable of accurately tracking the motion of the shaft even when it is subject to vibration or shock. Additionally, the encoder also features an adjustable deadband, which can be used to reduce the effects of noise or to prevent operation of the encoder at low speed.The HEDS-5500#E02 can be used in a variety of applications where position and linearity are important. It is useful in robotic motion control, motion tracking, and motion sensing for automation and medical equipment. It is also suitable for precision speed control and measuring the angular and linear position of a motor.The HEDS-5500#E02 encoder works by sensing the position of the shaft relative to the base of the encoder. It consists of an optical encoder wheel, an extension drive shaft, two parallel lines of optical sensors, and four output pins. The encoder wheel has transparent lines with four positions; each line is one bit wide. The optical sensors detect the lines on the encoder wheel and feed signals to the output pins.When the encoder is rotating, the positions of the optical sensors change with respect to the lines on the wheel. This is what triggers the output pins to go high or low, depending on the position of the encoder relative to the sensors. The output signal from the output pins is used to control the motion or the relative position of a motor or a mechanical system.The HEDS-5500#E02 is a reliable and versatile encoder that can be used in a variety of applications. It has excellent motion tracking and linearity and is capable of efficiently measuring positional changes. It is also easy to install and requires very little wiring or setup. With its high resolution and adjustable deadband, the HEDS-5500#E02 encoder is ideal for robotics and medical equipment, as well as industrial automation applications.

The specific data is subject to PDF, and the above content is for reference