| Allicdata Part #: | HEDS-5500#K05-ND |
| Manufacturer Part#: |
HEDS-5500#K05 |
| Price: | $ 29.18 |
| Product Category: | Sensors, Transducers |
| Manufacturer: | Broadcom Limited |
| Short Description: | ENCODER KIT 2CH 96CPR 3/16" |
| More Detail: | N/A |
| DataSheet: |  HEDS-5500#K05 Datasheet/PDF |
| Quantity: | 1000 |
| 100 +: | $ 26.52800 |
Specifications
| Series: | HEDS |
| Part Status: | Active |
| Encoder Type: | Optical |
| Output Type: | Quadrature (Incremental) |
| Pulses per Revolution: | 96 |
| Voltage - Supply: | 5V |
| Actuator Type: | 3/16" Open Center |
| Detent: | No |
| Built in Switch: | No |
| Mounting Type: | Chassis Mount, Motors |
| Orientation: | Vertical |
| Termination Style: | Terminal Pins |
| Rotational Life (Cycles Min): | -- |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
HEDS-5500#K05 encoders are widely used in industrial, automotive, and other electronics applications, as they are capable of accurately measuring the rotation and acceleration of a shaft, as well as the direction of travel. These devices are able to output a variety of digital signals, depending on the application.
The HEDS-5500#K05 encoder is a type of optical encoder. This device works by using a code disk or wheel to detect the position of the shaft on which the device is mounted. The code disk has a pattern of alternating transparent and opaque lines. The encoder has an LED and photo-detector on opposite sides of the code disk. As the code disk rotates, the LED emits light which is reflected back by the opaque portions of the disk to the photo-detector. The photo-detector can then convert this light signal into a digital signal.The digital output from the HEDS-5500#K05 encoder is dependent on the type of code disk used. The most commonly used code disk is the Gray code disk, which has a 256-position code sequence. This code sequence allows the encoder to output a binary digital signal, indicating the exact position of the shaft. The outputs can then be used to control or measure the precise position and velocity of the shaft.In addition to being used for linear measurement or position control, the HEDS-5500#K05 encoder can also be used for rotary axis control. This can be done by mounting the encoder on a rotary shaft, such as that of a servomotor or stepper motor, and setting a specific number of counts per revolution. This allows the encoder to measure the exact angular position, velocity, and direction of the rotary shaft.The HEDS-5500#K05 encoder can also be used to measure the acceleration of a rotary shaft. This is done by connecting the encoder to an accelerometer, which measures the acceleration of the shaft in three-dimensional space. The accelerometer then sends the acceleration signals to the encoder, which uses these signals to output a digital signal indicating the acceleration of the shaft.The HEDS-5500#K05 encoder is a highly versatile device, capable of measuring and controlling both linear and rotary motion. It is widely used in industrial, automotive, and electronics applications due to its accuracy, reliability, and cost-effectiveness.
The HEDS-5500#K05 encoder is a type of optical encoder. This device works by using a code disk or wheel to detect the position of the shaft on which the device is mounted. The code disk has a pattern of alternating transparent and opaque lines. The encoder has an LED and photo-detector on opposite sides of the code disk. As the code disk rotates, the LED emits light which is reflected back by the opaque portions of the disk to the photo-detector. The photo-detector can then convert this light signal into a digital signal.The digital output from the HEDS-5500#K05 encoder is dependent on the type of code disk used. The most commonly used code disk is the Gray code disk, which has a 256-position code sequence. This code sequence allows the encoder to output a binary digital signal, indicating the exact position of the shaft. The outputs can then be used to control or measure the precise position and velocity of the shaft.In addition to being used for linear measurement or position control, the HEDS-5500#K05 encoder can also be used for rotary axis control. This can be done by mounting the encoder on a rotary shaft, such as that of a servomotor or stepper motor, and setting a specific number of counts per revolution. This allows the encoder to measure the exact angular position, velocity, and direction of the rotary shaft.The HEDS-5500#K05 encoder can also be used to measure the acceleration of a rotary shaft. This is done by connecting the encoder to an accelerometer, which measures the acceleration of the shaft in three-dimensional space. The accelerometer then sends the acceleration signals to the encoder, which uses these signals to output a digital signal indicating the acceleration of the shaft.The HEDS-5500#K05 encoder is a highly versatile device, capable of measuring and controlling both linear and rotary motion. It is widely used in industrial, automotive, and electronics applications due to its accuracy, reliability, and cost-effectiveness.
The specific data is subject to PDF, and the above content is for reference
Latest Products
62P22-L4G
OPTICAL ENCODER
HEDT-9141#I00
ENCODER HT 3CH 512CPR 11MM
AEDS-9641-P10
ENCODER DGTL 2CH150LPI BENT LD
AEDS-8011-H11
ENCODER KIT 3CH INCREMENT 400CPR
NSE11DV57NCF215A
ENCODER MECH 15-PULSE 30-DETENT
HS35F-100-R2-BS-1000-A-9V...
ENCODER ROTARY 1000PPR 9V