Allicdata Part #: | HEDS-9732#T50-ND |
Manufacturer Part#: |
HEDS-9732#T50 |
Price: | $ 6.59 |
Product Category: | Sensors, Transducers |
Manufacturer: | Broadcom Limited |
Short Description: | ENCODER SMALL 2CH 2000CPR STD |
More Detail: | N/A |
DataSheet: | HEDS-9732#T50 Datasheet/PDF |
Quantity: | 1000 |
450 +: | $ 5.99760 |
Series: | HEDS |
Part Status: | Active |
Encoder Type: | Optical |
Output Type: | Quadrature (Incremental) |
Pulses per Revolution: | 2000 |
Voltage - Supply: | 3.3VDC |
Actuator Type: | Codewheel Not Included |
Detent: | No |
Built in Switch: | No |
Mounting Type: | Chassis Mount |
Orientation: | Vertical |
Termination Style: | Terminal Pins |
Rotational Life (Cycles Min): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Encoders – HEDS-9732#T50 Application Field and Working Principle
Encoders are a type of electromechanical device that converts physical movement such as rotary motion into digital signals. They are used in a variety of applications, from motor control to robotic guidance. The HEDS-9732#T50 is a type of optical encoder used for precision and accurate position control and feedback. In this article, we will discuss the application fields and working principle of the HEDS-9732#T50.
Applications of HEDS-9732#T50
The HEDS-9732#T50 is an incremental optical encoder which is suitable for motion control applications. It is typically used in feedback control loops to accurately measure position and velocity. It is also used in applications that require precise speed measurements, such as motor control and robotic guidance. In addition, it is also used in industrial applications such as machine tools and assembly lines.
The HEDS-9732#T50 is a type of rotary encoder, meaning that it measures the rotational position of an axis. It can be used to measure speeds up to 600 rpm (revolutions per minute) with a resolution of up to 2400 counts per revolution. This makes it well-suited for high speed, high precision applications that require high accuracy. The HEDS-9732#T50 is also equipped with an interrupt output to signal whenever the device detects changes in the rotational position of the axis.
Working Principle of HEDS-9732#T50
The HEDS-9732#T50 is an optical encoder, meaning that it uses light to determine the position of the rotary axis. It consists of a disk with a pattern of evenly spaced transparent and opaque lines, known as the code disk. As the code disk rotates, a light source shines light through the code disk and onto a synchronized photosensor. The photosensor detects the changing light patterns on the disk and sends signals to a feedback control loop.
The HEDS-9732#T50 has two outputs: the A and B signals. These signals are based on the Gray code, a system which assigns binary values to consecutive transitions. The output of the HEDS-9732#T50 is in quadrature format, meaning that the A and B signals are 90 degrees out of phase with each other. By monitoring both signals, the feedback control loop is able to monitor the position of the rotary axis with exceptional accuracy and precision, down to sub-millimeter levels.
Conclusion
The HEDS-9732#T50 is a type of optical encoder used for accurate and precise position feedback and control. It is suitable for use in high-speed, high-precision applications such as motor control and robotic guidance. By monitoring the A and B signals of the HEDS-9732#T50 in quadrature format, the motion of the rotary axis can be accurately monitored down to sub-millimeter levels. In summary, the HEDS-9732#T50 is a reliable and cost-effective solution for motion control applications.
The specific data is subject to PDF, and the above content is for reference
OPTICAL ENCODER
ENCODER HT 3CH 512CPR 11MM
ENCODER DGTL 2CH150LPI BENT LD
ENCODER KIT 3CH INCREMENT 400CPR
ENCODER MECH 15-PULSE 30-DETENT
ENCODER ROTARY 1000PPR 9V