HF1008R-332J

DC Resistance (DCR):	1.9 Ohm Max
Height - Seated (Max):	0.095" (2.41mm)
Size / Dimension:	0.115" L x 0.105" W (2.92mm x 2.66mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	7.9MHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	60MHz
Q @ Freq:	30 @ 7.9MHz
Series:	HF1008R
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	280mA
Tolerance:	±5%
Inductance:	3.3µH
Material - Core:	Ferrite
Type:	--
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors have been used in power electronics applications for decades. The HF1008R-332J is a high frequency, high performance inductor specifically designed for power electronics applications.The HF1008R-332J is an inductor that consists of two elements: an inductor core and a wire coil. The core is made of ferromagnetic material, such as iron-silicon alloy, that is shaped into a rectangular cross-section and the winding is made of copper or aluminum. It has a rated current of 8.2A and a rated inductance of 22uH.The HF1008R-332J can be found in a variety of applications, including power supplies, DC-DC converters, high frequency switching, converters, motor drives, and UPS systems. It is specifically used for power electronics applications where high frequency operation and high performance are essential.The HF1008R-332J is designed for high frequency operation, which is achieved by the use of a higher inductance and a high quality iron-silicon alloy core material. This allows for the inductor to be operated in both high frequency and low frequency applications. The inductor’s efficiency also increases due to the reduced core losses, due to the use of the higher grade core material.The HF1008R-332J has a rated power of 0.9kW, and a temperature range of -40C to +105C. The inductor’s core temperature must be kept within this range in order to ensure optimal performance. The PCB mountable structure of the inductor ensures a firm and reliable connection to the circuit board. The pin hole dimension of the inductor is 2.54mm, and the mounting hole spacing is 15mm.The working principle of the HF1008R-332J is based on Faraday’s law. This states that a time varying magnetic field will induce an electric field in a conductor. The current that flows through the inductor is affected by the magnetic field that is applied to it. When an alternating current is introduced to the inductor, the changing magnetic field creates a voltage across the inductor, which acts as a capacitor.The inductor’s efficiency is greatly increased due to the use of the higher special core material which reduces the core losses. In addition, the inductor’s construction is designed to provide low resistance, allowing for increased system efficiency.In conclusion, the HF1008R-332J is a high frequency and high performance inductor specifically designed for power electronics applications. The inductor is designed to operate in both low frequency and high frequency applications, and its efficiency is increased due to the use of the higher special core material. The PCB mountable structure and low resistance design ensure a reliable connection and improved system efficiency.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description