HFA1110EVAL

Series:	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Channels per IC:	1 - Single
Moisture Sensitivity Level (MSL):	--
Amplifier Type:	Buffer
Output Type:	Single-Ended
Slew Rate:	1300 V/µs
-3db Bandwidth:	850MHz
Current - Output / Channel:	60mA
Current - Supply (Main IC):	21mA
Voltage - Supply, Single/Dual (±):	9 V ~ 11 V, ±4.5 V ~ 5.5 V
Board Type:	Fully Populated
Supplied Contents:	Board(s)
Utilized IC / Part:	HFA1110

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The HFA1110EVAL Evaluation Board is an operational amplifier evaluation board, designed to be used with any of the HFA1110 series of operational amplifiers. The HFA1110EVAL is designed to provide designers with the ability to quickly and accurately evaluate the performance of the various HFA1110 series of amplifiers in a variety of applications. The evaluation board can be used to evaluate the performance characteristics of any of the HFA1110 amplifiers, including the HFA1110A, HFA1110B, and HFA1110C.

Application Field

The HFA1110EVAL Evaluation Board is suitable for a wide range of applications, such as instrumentation amplifiers, voltage and current followers, active filters, motor control, charge pumps, and voltage and current services. As a result, it is suitable for use in industry cycles, medical and dental equipment, automotive electronics, electronics for communication systems, audio equipment, switching power supplies, and many other applications.The Evaluation Board can also be used for analog circuit simulation. It can be used with a digital-to-analog converter to simulate analog circuits. This is done by connecting the Evaluation Board to the DAC, setting up the signal paths and waveforms, and then running a simulation to study the performance of the components.

Working Principle

The HFA1110EVAL Evaluation Board operates under a closed-loop system, meaning that it is not necessary to externally adjust the gain or offset of the amplifier. The board will instead detect and adjust the gain and/or offset to ensure peak performance.The HFA1110EVAL Evaluation Board contains three separate sub-stages, consisting of a dual high-speed, low-noise, operational amplifier core (A), a gain setting and current-limiting stage (B), and a low-noise bias stage (C). Each sub-stage has its own separate signal path, with different gains and current limits. Stage A is the core, providing the high gain and low noise that is necessary for most applications. Stage B is dedicated to gain setting and current limiting; this stage is responsible for preventing overload and providing gain control. Finally, stage C is the low-noise setup. This stage provides fine control of the gain and offset in order to maximize performance. The HFA1110EVAL Evaluation Board is powered by a single dual-channel supply voltage between ±2.5V to ±12V. This voltage can be adjusted to cover any dynamic range. The Evaluation Board also features a signal input voltage of ±100mV. This allows for testing and evaluating of a wide range of input signals.

Connectivity

The HFA1110EVAL Evaluation Board features several ports for external connections, allowing for easy connection of other evaluation boards, components, and test sets. The board has several onboard connectors for input and output signals. These include a safety connector for isolation of the input signals, a Protel-compatible 0.050-inch socket for connection of a programmable test board, ESD and surge protection, and a signal reference header. The board also features onboard headers for prototyping and debugging of the designed circuit. The board is also equipped with TTL-compatible test points, allowing for easy readout of responses and waveforms on a logic analyzer. The board also has a 0.1’’ pitch connector that enables easy connection of external oscilloscopes or signal generators for analysis and testing.

Conclusion

The HFA1110EVAL Evaluation Board is a highly versatile and reliable operational amplifier evaluation board. It is able to provide designers with the ability to accurately and quickly evaluate the performance of any of the HFA1110 series of amplifiers in a variety of applications. The board is also able to be used for analog circuit simulation, by connection the Eval Board to a digital-to-analog converter. Additionally, the board contains numerous onboard ports and connectors for external connections, allowing for easy connection of other evaluation boards, components, and test sets.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description