HG-1012JA 20.0480M-BX0 Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electric circuits that generate periodic waveforms, or signals, as output. They are widely used in a variety of electrical circuits, including timers, amplifiers, and communication systems. The specific characteristics of the output waveform depend on the type of oscillator and the parameters it is designed to operate on.

The HG-1012JA 20.0480M-BX0 is an oscillator designed to produce high-frequency signals for various applications. It is a three-terminal device, with two capacitors connected to the terminals. The two capacitors act as tanks for storing charge. The third terminal is connected to a timing capacitor and an output terminal. An oscillating waveform is generated when charge is quickly alternated between the capacitive tanks.

The primary application field of the HG-1012JA 20.0480M-BX0 is in communication systems for signal generation and transmission. The oscillator can produce precise high-frequency signals necessary for effective data rates. It is also used as a clock source in other communication applications, such as synchronous optical networks (SONET). Additionally, the oscillator has been used for timing and control applications such as microcontrollers, clocks, and modems.

The operating principle behind the HG-1012JA 20.0480M-BX0 is based on the principles of Pierce oscillators. These oscillators use a combination of a transistor and two capacitors to generate a continuous waveform from a DC power source. The oscillator works by rapidly alternating the charge stored in the two capacitors. The alternating charge induces a voltage across the timing capacitor, which is connected to the output terminal. The oscillation frequency is determined by the values of the capacitors and the gain of the transistor.

The HG-1012JA 20.0480M-BX0 is a high-accuracy oscillator designed to produce signals with a wide-range of frequencies in the range of 15–300 MHz. The oscillator is highly reliable and has a low power consumption. The output waveform can be fine-tuned to support various applications through adjustment of the timing capacitor and its associated circuit.

In conclusion, the HG-1012JA 20.0480M-BX0 is a high-performance oscillator designed for use in communication systems, microcontrollers, and other timing and control applications. It utilizes the principles of Pierce oscillators and utilizes two capacitors to generate a continuous waveform at precise frequencies from a DC power source. The output waveform can be tuned to suit the application through appropriate adjustment of the timing capacitor and its associated circuit.

The specific data is subject to PDF, and the above content is for reference