HG-2150CA 12.0000M-BXC3

Oscillators

The HG-2150CA 12.0000M-BXC3 oscillator is a frequency generating component that has a wide range of applications. This oscillator has sine, square, triangle, or sawtooth wave outputs and a wide range of frequency capabilities. It is an economically-priced analog Circuit Component used for many different types of applications.

The primary uses of the HG-2150CA 12.0000M-BXC3 oscillator are for signal generation, frequency synthesis and timing-control applications. It can be used in radio broadcasting, audio and video signal processing, controlling electric motors and generators, frequency measurements, and creating waves for electronic testing, among other applications. In addition, it can also be used in clocks, time-bases for instrumentation, frequency counters, and digital-to-analog converters.

The HG-2150CA 12.0000M-BXC3 oscillator has a wide range of frequency outputs and can provide a frequency change from 100kHz to 1MHz. It can generate a stable sine, square, triangle, or sawtooth wave. It is designed to operate at a nominal frequency within its frequency range and it has an on-board thermal compensator enabled to maintain a steady waveform. The HG-2150CA 12.0000M-BXC3 oscillator has the ability to run on 12V DC or 24V AC and has a maximum power consumption of 2.5W.

The HG-2150CA 12.0000M-BXC3 oscillator works based on negative-resistance oscillator circuit technology. This circuit utilizes an amplifier attached to an amplifier with a feedback loop. This loop creates a negative-resistance characteristic that causes the frequency of the output to be determined by a resonance frequency of an amplifying element. The amplitude of the output is determined by a gain factor of the circuit. This oscillator produces a signal with a frequency that can be adjustable by changing the resistor values of the resonant oscillator circuit.

In conclusion, the HG-2150CA 12.0000M-BXC3 oscillator is a unique frequency generating component that provides a wide range of applications. It is primarily used for signal generation, frequency synthesis, and timing-control applications. It works on a negative-resistance oscillator circuit technology and produces a stable sine, square, triangle, or sawtooth wave output. It has a wide range of frequency outputs and can run on a 12V DC or 24V AC power supply.