Allicdata Part #: | HGP.00.250.CLAP-ND |
Manufacturer Part#: |
HGP.00.250.CLAP |
Price: | $ 0.00 |
Product Category: | Connectors, Interconnects |
Manufacturer: | LEMO |
Short Description: | CONN PNL MNT RCPT COAX PIN SLDER |
More Detail: | NIM-CAMAC CD/N 549 Connector Receptacle, Male Pin ... |
DataSheet: | HGP.00.250.CLAP Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | 0.00000 |
Fastening Type: | Push-Pull |
Insertion Loss: | -- |
Mating Cycles: | 5000 |
Voltage Rating: | 700V |
Center Contact Material: | Brass |
Operating Temperature: | -20°C ~ 100°C |
Dielectric Material: | Polyetheretherketone (PEEK) |
Center Contact Plating: | Gold |
Body Finish: | Chrome |
Body Material: | Brass |
Includes: | 3 pcs - 1 Connector, 1 Lockwasher, 1 Nut |
Ingress Protection: | IP68 - Dust Tight, Waterproof |
Housing Color: | Silver |
Features: | -- |
Series: | 00 |
Cable Group: | -- |
Mounting Feature: | Bulkhead - Rear Side Nut |
Mounting Type: | Panel Mount |
Impedance: | 50 Ohm |
Shield Termination: | Solder |
Contact Termination: | Solder Cup |
Connector Type: | Receptacle, Male Pin |
Connector Style: | NIM-CAMAC CD/N 549 |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Coaxial connectors, commonly referred to as RF connectors, are used in a variety of applications where electromagnetic interference (EMI) shielding is required. One such connector, the HGP.00.250.CLAP, has a variety of uses in audio, video, communication and control applications. This article will discuss the wide range of applications and the working principle of the HGP.00.250.CLAP.
The HGP.00.250.CLAP is a two-piece, push-pull type, miniature connector used primarily in RF link applications. It has a 1.25 mm pitch with an inner and outer braid designed to provide EMI shielding. Its features are designed to ensure a reliable and secure connection. It has a snap-lock mechanism designed for secure mating and a coupling latch that helps to maintain the integrity of the interconnect over time. In addition, it also has environmental seals and a nut locking system that helps improve its performance in harsh conditions.
The wide range of applications for the HGP.00.250.CLAP includes audio/video connections, communications systems, automation systems, computer connectivity and a variety of consumer electronics. The audio/video connection applications include HDMI, SCART, DVI and S-video connectors. It is also used in a variety of communication systems, such as radios, cellular base stations, radio frequency identification (RFID), satellite systems and LAN/WAN systems. Automation systems, including conveyor control, robotics and solenoid control, also rely on the HGP.00.250.CLAP.
The HGP.00.250.CLAP is ideal for computer connectivity in a range of applications, such as handheld and industrial computers, document scanners and printer interfaces. For consumer electronics, it is commonly found in televisions, digital cameras, DVD players and monitors. The HGP.00.250.CLAP can also be used in security systems, vending machines and medical equipment.
The working principle of the HGP.00.250.CLAP is based on the contact interface between the center conductor and the inner conductor, which produces the electrical and mechanical forces necessary to achieve secure and reliable contact. The center conductor is made of a conductive material, usually copper, and is designed to provide an electrical link between two components. The inner conductor, which is surrounded by a dielectric layer, works to provide additional insulation and electrical protection.
At the base of the HGP.00.250.CLAP is a rubber boot designed to provide additional electrical insulation and to protect the contact interface from dust and moisture. The rubber boot is in contact with the dielectric layer and the center conductor and helps to maintain the integrity of the connection over time. The boot also helps to provide further EMI shielding for the connectors.
In summary, the HGP.00.250.CLAP is a two-piece, push-pull type, miniature connector used primarily in RF link applications where EMI shielding is required. It is a great choice for a variety of audio, video, communication and control applications. The working principle of the HGP.00.250.CLAP relies on the contact interface between the center conductor and the inner conductor, which produces the electrical and mechanical forces necessary for a secure and reliable contact.
The specific data is subject to PDF, and the above content is for reference
CONN SMB PLUG STR 50OHM CRIMPSMB Connect...
CONN MINI UHF PLUG STR 50 OHMUHF, Mini C...
CONN TNC PLUG R/A 50 OHM CRIMPTNC Connec...
CONN SMB PLUG R/A 50 OHM SOLDERSMB Conne...
CONN N JACK STR 50 OHM CRIMPN Type Conne...
CONN BNC PLUG STR 75 OHM CRIMPBNC Connec...