HHV-25FB-52-4M32

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are one of the most prevalent and frequently used electrical components in the world today. They are used in a wide range of applications, from resistor networks to power supplies to signal processing. The HHV-25FB-52-4M32 through hole resistor is one such component that has become the industry standard in many applications, due to its reliability and ruggedness.

The HHV-25FB-52-4M32 through hole resistor is a leaded axial resistor with an adjustable resistance value. It is a precision resistor with a wide range of resistance values, from 25 to 52 ohms. It is rated for up to 4.32 watts and a temperature range of -40 to +85°C. The resistor is made from an alloy of nickel and iron and is anodized for moisture resistance. As the name implies, it has two terminals, one of which is connected to its leaded axial body. It is usually mounted on a printed circuit board using a heat sink or pad, and is then wired directly into the board.

The application field and working principle of the HHV-25FB-52-4M32 through hole resistor are simple. Its primary function is to limit the flow of current in an electrical circuit. This can be accomplished by increasing the resistance of a given component, ensuring that more energy is required to pass through the circuit, while at the same time limiting the amount of current available. This not only helps to reduce electrical shock hazards, but also helps to reduce interference in a wide variety of applications.

The HHV-25FB-52-4M32 through hole resistor is used widely in a variety of applications. It is often used as a filter in power supplies to reduce electrical noise in equipment such as televisions. It is also used in various amplifiers to improve output signal integrity and prevent accidental over-amplification. Additionally, it can be used in motor control applications to regulate the rotation rate of a motor, and is commonly found in adjustable speed motors.

The working principle of the HHV-25FB-52-4M32 through hole resistor is based on Ohm’s Law, which states that the resistance of a resistor is directly proportional to the voltage across it. The voltage across the resistor is equal to the current through it multiplied by the resistance. Therefore, by changing the resistance value of the resistor, the current through it will be adjusted accordingly. The resistance value of the HHV-25FB-52-4M32 is adjustable, allowing it to be used in a wide range of applications.

The HHV-25FB-52-4M32 through hole resistor is an extremely useful and versatile component that is still one of the most commonly used resistors today. Thanks to its ruggedness and reliability, it has become the industry standard in many applications. Thanks to its adjustable resistance, it can be used in a variety of applications, from motor control to audio filtering. Its simple working principle based on Ohm’s Law makes it a reliable and dependable component in any electrical circuit.

The specific data is subject to PDF, and the above content is for reference