HHV-25FB-52-590K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are widely used across a range of applications, particularly in the areas of aviation, robotics and heavy engineering. The fundamental purpose of a resistor is to reduce the current flow to a desired level. The HHV-25FB-52-590K resistor is a through-hole resistor perfect for this purpose. It is designed to provide reliable service in long-term, high-power applications.

The HHV-25FB-52-590K is a two-wire, through-hole resistor with an operating power rating of 25 watts and a temperature coefficient of 2%. It has a resistance value of 590,000 ohms and a tolerance rating of +/- 5%. The resistor is soldered to a printed circuit board and is rated for operation in a temperature range of -55°C to +125°C.

In terms of size, the resistor is 53mm in length, 21mm in width and 18mm in height. It has leads that are 10.4mm long with a 10.1mm lead spacing. The HHV-25FB-52-590K can be ordered with either a tin-plated aluminum or tin-plated copper material finish.

At its core, the working principle of the HHV-25FB-52-590K is fairly straightforward. Basically, the resistor limits current flow by providing an obstruction in the electrical circuit. This obstruction is known as resistance and it is measured in ohms. As current is passed through the resistor, it is forced to split and follow along two separate paths in order to work its way around the resistor’s obstruction.

When it comes to application areas, one of the most common uses of the HHV-25FB-52-590K is in high-power, high-current applications. It is especially useful for reducing the electrical current in circuits running at higher voltages. Additionally, the resistor is commonly used to replace lower power components and to provide protection for circuits that may be subject to inductive loads, such as motors or solenoids.

The HHV-25FB-52-590K is also used widely in the area of robotics. Robotics systems need to draw large amounts of electrical current in order to power their components. The HHV-25FB-52-590K can be used to reduce the amount of current flowing through the system and make for a more reliable, energy-efficient system.

Finally, the HHV-25FB-52-590K is also useful for heavy engineering applications. In applications that require high-current systems to be powered by small, dependable components, the HHV-25FB-52-590K is an excellent choice. The resistor can be used to reduce the current and ensure that the system is running optimally.

In summary, the HHV-25FB-52-590K through-hole resistor is a reliable, long-lasting component perfect for a wide variety of applications. Its ability to reduce current, provide protection from inductive loads and replace lower power components makes it invaluable in the areas of heavy engineering, robotics and aviation. When it comes to through-hole resistors, the HHV-25FB-52-590K is an outstanding choice.

The specific data is subject to PDF, and the above content is for reference