HHV-25FB-52-9M53

Series:	HHV
Packaging:	Bulk
Part Status:	Active
Resistance:	9.53 MOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole ResistorsThrough hole resistors are a kind of electronic component which is made by matching a certain amount of resistive material with a certain amount of metal material to form a ceramic compound. It is widely used in various circuit fields and can be divided into two types: single-layer and multi-layer resistors.Features of Through Hole ResistorsThrough hole resistors have the following features:1. High precision: As long as the resistance value is consistent, the precision of the product can reach up to 1%, which is more than ten times that of the ordinary resistors. 2. Good shielding performance: The shell of the product adopts metal material, which has a good shielding performance against electromagnetic interference.3. Resistance stability: Through hole resistors can maintain a stable resistance under long-term working environment, which is suitable for circuits that require stable performance over a long period of time.4. High load capacity: The ceramic matrix material used in through hole resistors can bear a relatively large current and voltage, so that the load capacity of the product is relatively high. 5. Small size: The resistive material used in through hole resistors is small in size, and the product itself is much smaller than air core, wire wound and carbon film resistors.HHV-25FB-52-9M53 application field and working principleHHV-25FB-52-9M53 is a type of through hole resistor. Its product model number contains the following information:1. Number 25 indicates that the product is a 25 types of through hole resistors.2. Number FB indicates that the resistive material of this product is ferrite material.3. Number 52 indicates that the product has a resistance value of 5.2KΩ.4. Number 9M indicates that the product has a high resistance value of 9MΩ.The working principle of the product is simple. When a current passes through the two ends of the product, a voltage drop is generated according to Ohm’s law, and the voltage value can be calculated according to the resistance value. The application fields of the product mainly include communication equipment, medical equipment, instrumentation, consumer electronics and other fields. It can be used as a part of attenuator, filter, circuit protection, overcurrent protection, and waveform shaping. It can effectively reduce the size of the circuit, reduce the power consumption and heat generation of the circuit, while maintaining a stable working state.In addition, this type of through hole resistor is relatively small in size and easy to install, and its resistance may be adjusted by manually adding a resistor in parallel according to the requirements.To sum up, through hole resistors have many advantages, HHV-25FB-52-9M53 is a kind of through hole resistor which is widely used in various circuit fields. It has features such as small size, high precision, good shielding performance, resistance stability and high load capacity. Therefore, it is a reliable and widely used electronic component, which can effectively reduce the size of the circuit, reduce the power consumption and heat generation of the circuit, while ensuring a stable working state.

The specific data is subject to PDF, and the above content is for reference