| Allicdata Part #: | HHV-25FT-52-105K-ND |
| Manufacturer Part#: |
HHV-25FT-52-105K |
| Price: | $ 0.03 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES MF 1/4W 1% AXIAL |
| More Detail: | 105 kOhms ±1% 0.25W, 1/4W Through Hole Resistor Ax... |
| DataSheet: |  HHV-25FT-52-105K Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.02116 |
| Series: | HHV |
| Packaging: | Tape & Box (TB) |
| Part Status: | Active |
| Resistance: | 105 kOhms |
| Tolerance: | ±1% |
| Power (Watts): | 0.25W, 1/4W |
| Composition: | Metal Film |
| Features: | Flame Retardant Coating, High Voltage, Safety |
| Temperature Coefficient: | ±200ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.094" Dia x 0.248" L (2.40mm x 6.30mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are used widely in the electronic industry. One of the components that make up this type of resistor is the HHV-25FT-52-105K. This resistor is used for applications that require an operating voltage of 25 volts that falls into the range of 80 Hz to 200 MHz.
The primary application of a HHV-25FT-52-105K resistor is general-purpose RF matching. An RF-matching system allows an RF circuit to operate optimally by allowing the transistor to interact and couple with the correct frequency. The matching circuit is also necessary for wideband communication as it helps achieve maximum signal isolation and power transfer. The HHV-25FT-52-105K can be used as a basic matching element for a two-port network. This type of matching can be used when there is a need to increase resistance by a factor of three.
The working principle of the HHV-25FT-52-105K component is that it functions as a voltage divider, allowing the current to pass through the resistor. This works by taking the input signal and then dividing the voltage into two parts, with the resistor as the dividing line. The resistor’s ability to divide the voltage is dependent on its resistance.
The HHV-25FT-52-105K is a through-hole resistor, and this makes it ideal for applications where there is a requirement for high precision and a stable performance. In these types of applications, it is essential that there is a reliable connection and a precise resistance level. This type of resistor is highly efficient in dissipating the heat caused by current flowing through it. The ground layer of the resistor is also designed to minimize distortion as much as possible.
Through hole resistors can be used in many different types of circuits and applications. The HHV-25FT-52-105K component can be used in differential amplifier circuits, antenna input circuits, and other switch mode power supply applications. In all these cases, its functionality is the same; it acts as a voltage divider and is able to maintain a consistent current and voltage throughout the circuit.
The HHV-25FT-52-105K is a through hole resistor that is highly reliable and has a maximum rated power of 0.6 Watts. It is commonly used in RF matching, voltage dividing, and other power supply circuits. It can also be used as a matching element for a two-port network.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...