HHV-25FT-52-1M13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are passive components commonly found in many types of electronics, such as computers, phones, and audio equipment. The HHV-25FT-52-1M13 is a through hole resistor that is often used when electrical components need to be connected to an integrated circuit. Understanding this resistor’s application field and working principles can help to ensure that it is used correctly for the best performance.

The HHV-25FT-52-1M13 through hole resistor is typically used to bridge two points in an electrical circuit, connecting them in a way that does not cause excessive current to flow. This is accomplished by making the resistor a medium-power, medium-tolerance resistor. This means that it offers effective electrical resistance without leading to large drops in current, which could damage the circuit. The resistor is a 1 megohm ohm resistor, meaning that it provides 1 megohms of resistance, or 1,000,000 ohms. Its power dissipating capacity is 1/2 watt.

In order to understand the specifics of the HHV-25FT-52-1M13 through hole resistor, it’s important to consider its working principle. The resistor works by blocking certain amounts of current flow in a circuit. As current passes through the resistor, it produces heat, which is dissipated through the resistor’s dissipation system. This prevents the resistor from getting too hot and potentially damaging any other components within the circuit.

Due to its medium-power, medium-tolerance properties, the HHV-25FT-52-1M13 through hole resistor is highly versatile. It can be used for a variety of applications, such as connecting components in circuits, providing stabilization for low-voltage power supplies, attenuating signal voltage, and providing impedance matching. It is also often used in microcontroller programming environments.

In addition to the standard HHV-25FT-52-1M13, there are several other through hole resistor options available. For example, the HHV-25FT-32-1M4 is a 4 megohm resistor with a power dissipating capacity of 1/2 watt. There is also the HHV-25FT-30-1M2, which is a 2 megohm resistor with a power dissipating capacity of 1 watt. All of these resistors share the same basic working principle as the HHV-25FT-52-1M13.

When installing a through hole resistor such as the HHV-25FT-52-1M13, it’s important to ensure the connections are secure and that the resistor is properly mounted on a circuit board. This will help to prevent heat damage to the resistor and any other components within the circuit. Additionally, the wiring should be checked to ensure that it is not shorted or frayed, and that no current is leaking.

The HHV-25FT-52-1M13 through hole resistor is a highly versatile and effective resistor that can be used for a variety of applications. Understanding its application field and working principles is important in order to guarantee that the resistor is used correctly. With its 1 megohm ohm resistance, it is well-suited for applications where a moderate amount of electrical resistance is needed without excessive drops in current.

The specific data is subject to PDF, and the above content is for reference