HHV-25FT-52-3M24

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	3.24 MOhms
Tolerance:	±1%
Power (Watts):	0.25W, 1/4W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.094" Dia x 0.248" L (2.40mm x 6.30mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors can be defined as electrical components that are used to regulate the flow of electrical current in an electronic circuit. Through hole resistors are designed to resist the flow of current and therefore offer protection for the surrounding components.These resistors may be constructed using one or more insulated electrical connections which are used to form a complete, electrically-insulated device. The most common construction consists of two electrical connections which are connected by a resistor body and two small leads. The two leads run through a hole in the resistor body in order to make electrical contact with the surrounding components in the circuit.Through hole resistors are generally available in a variety of sizes, shapes, and resistance values. They can range from a few milliohms to several ohms, depending on the specific design of the resistor. In addition, the size and shape of the resistor will depend on the current-carrying capacity that is desired.

HHV-25FT-52-3M24 Application Field and Working Principle

The HHV-25FT-52-3M24 is a through-hole resistor that is designed for applications where high current is required. This resistor is rated up to 25 Amps and its resistance value is 52 ohms. This resistor is designed with a special construction which helps to ensure a low resistance value and low temperature rise for a greater level of protection against current overloads.The working principle of the HHV-25FT-52-3M24 is based on the principle of Ohm’s law, which states that the current flowing through a resistor is inversely proportional to the resistance of the component. This means that as the resistance increases, the current will decrease; and as the resistance decreases, the current will increase.The HHV-25FT-52-3M24 is designed to resist the flow of current so that it can protect the surrounding components from damage. The resistor will also reduce the current flowing through the system by limiting the voltage dropping through the components. This will help to ensure system stability and will help to protect against electrical noise.The HHV-25FT-52-3M24 is versatile as it can be used in a variety of different circuits. It is commonly used in applications such as power supplies, LED lighting, and motor control systems. This resistor is also ideal for high power applications such as automotive ignition systems.In conclusion, the HHV-25FT-52-3M24 is a through hole resistor which designed for applications that require high current. Its high resistance value ensures that it can withstand current overloads and the construction ensures a low temperature rise and low resistance value. The HHV-25FT-52-3M24 can be used in high power applications, as well as a range of other circuits, making it a versatile and reliable component.

The specific data is subject to PDF, and the above content is for reference