Allicdata Part #: | HHV-25FT-52-56K2-ND |
Manufacturer Part#: |
HHV-25FT-52-56K2 |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES MF 1/4W 1% AXIAL |
More Detail: | 56.2 kOhms ±1% 0.25W, 1/4W Through Hole Resistor A... |
DataSheet: | HHV-25FT-52-56K2 Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.02116 |
Series: | HHV |
Packaging: | Tape & Box (TB) |
Part Status: | Active |
Resistance: | 56.2 kOhms |
Tolerance: | ±1% |
Power (Watts): | 0.25W, 1/4W |
Composition: | Metal Film |
Features: | Flame Retardant Coating, High Voltage, Safety |
Temperature Coefficient: | ±200ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.094" Dia x 0.248" L (2.40mm x 6.30mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors make up a broad class of electronics components that are used for a variety of electrical and electronic purposes. They serve primarily as a current-limiting device, enabling electronic devices to operate safely without damaging themselves. This article discusses the application field and working principle of HHV-25FT-52-56K2, one type of Through Hole Resistor.
The HHV-25FT-52-56K2 Through Hole Resistor is a versatile component suitable for a wide range of applications, including high voltage power supply, pulse voltage, audio amplifier, and general-purpose circuits. This resistor is especially suitable for general-purpose circuits because of its high power rating, over-current capability, and low temperature coefficient. The resistance range of this device is as low as 5 ohms to over one million ohms, depending on the desired application.
The working principle of the HHV-25FT-52-56K2 Through Hole Resistor is simple: it receives an electrical current and resists it by converting that current into heat energy. This is done by passing an electric current through a conducting element, which then creates a holding voltage on the other side of the resistor. Heat is then released as the electric current heats up the material it passes through. This heated material then creates the voltage which in turn is responsible for the resistance that prevents the current from getting any higher. The resistance that is created is determined by the material used in the resistor and by the size of the resistor.
When installing and operating the HHV-25FT-52-56K2 Through Hole Resistor, certain safety precautions should be taken to ensure safe and effective operation. First, the components should be assembled in the correct position; if it is not installed correctly, it can cause an electrical hazard. Second, the resistor should be regularly inspected to ensure there are no burned-out sections, exposed wiring, or other signs of malfunction. Third, it must be protected from direct contact with any sources of electrical current such as power supplies, motors, relay contacts, etc. Finally, the working temperature should also be kept in check; if the resistor gets too hot, it can become damaged or catch fire.
In conclusion, the HHV-25FT-52-56K2 Through Hole Resistor is a versatile component suitable for a wide range of applications. Its working principle is simple: it receives an electrical current and resists it by converting that current into heat energy. Before installation and operation, certain safety precautions should be taken to ensure safe and effective operation. With proper care and handling, the HHV-25FT-52-56K2 Through Hole Resistor can provide reliable operation for many years.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...