Allicdata Part #: | HHV-50FR-52-1M5-ND |
Manufacturer Part#: |
HHV-50FR-52-1M5 |
Price: | $ 0.03 |
Product Category: | Resistors |
Manufacturer: | Yageo |
Short Description: | RES MF 1/2W 1% AXIAL |
More Detail: | 1.5 MOhms ±1% 0.5W, 1/2W Through Hole Resistor Axi... |
DataSheet: | HHV-50FR-52-1M5 Datasheet/PDF |
Quantity: | 1000 |
5000 +: | $ 0.02501 |
Series: | HHV |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Resistance: | 1.5 MOhms |
Tolerance: | ±1% |
Power (Watts): | 0.5W, 1/2W |
Composition: | Metal Film |
Features: | Flame Retardant Coating, High Voltage, Safety |
Temperature Coefficient: | ±200ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.130" Dia x 0.354" L (3.30mm x 9.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
HHV-50FR-52-1M5 belongs to through hole resistors, which is an electronic component that can create a voltage drop between itself and a circuit. This type of resistor can be used in a wide range of applications.
First, this resistor can be widely used in regulating and adjusting the signal path of various electrical and electronic equipment, such as audio amplifiers, digital circuits, analog circuits, etc. This resistor can also be used for various low-power circuits and filters with better stability, thus can improve the accuracy of the system.
For instance, an integrated circuit like a pulse width modulator (PWM) can use a through hole resistor to limit the current while the circuit is in operation. This means that, while the chip is in operation, the damaging effects of the current and the heat produced are reduced.
This through hole resistor also has an important role in electronic circuits for power amplification. In such applications, the resistor can prevent sudden over load from causing long-term damage to the system. In addition to this, it can prevent peak currents that can exceed the rated current of the power transistor.
In order to achieve the best performance results, through hole resistors need to be applied correctly. Generally, a higher wattage resistor should be used to allow for greater power dissipation. The resistor should also be placed close to the component where current flows. This is because the resistor will cause losses in the electrical current and therefore it should be placed as close as possible to the component.
The working principle of an through hole resistor is very simple. It works by resisting the flow of current. This resistance opposes the flow of electrons in the circuit thus causing a voltage drop. The voltage drop is determined by the resistance value of the resistor.
To sum it up, through hole resistors like HHV-50FR-52-1M5 are widely used in many applications due to their efficient use in regulating and adjusting the signal paths of various electrical and electronic equipment. Their working principle is also quite simple - they resist the flow of current in order to create a voltage drop.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...