HHV-50FR-52-51M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors are resistors with leads that have been mounted through a device, such as a printed circuit board, and soldered to the board. The most common type of through-hole resistor is the axial-lead, which is a wire-wound resistor. It has a single, straight-line lead on either side. The lead must remain in its original position for the resistor to continue functioning properly. The HHV-50FR-52-51M is a 50 Ohm resistor designed for through-hole applications and it is quite popular among electronic component manufacturers.

The HHV-50FR-52-51M is a high precision resistor with very low temperature coefficients. It provides excellent stability under both high and low temperatures. This makes it ideal for use in a wide range of electronic equipment and applications. For instance, it is commonly used in telecom equipment, medical imaging, as well as for communications and control systems.

The HHV-50FR-52-51M also has a very good electrical characteristics, which makes it suitable for very low frequency applications. Its resistance is stable over a wide range of temperatures and also has high accuracy and very low drift after every long-term operation. This ensures it will maintain consistent values over time.

The working principle of the HHV-50FR-52-51M is typically a variant of the common voltage divider circuit. This type of circuitry is used to proportionally divide a voltage over two resistive components, the resistor and a capacitor. Since the resistor is not conductive, the voltage will be divided equally between the two components. This means that the voltage will also be divided proportionately among the two resistors based on their individual resistances.

The two most common types of through-hole resistors are carbon and metal film. The HHV-50FR-52-51M belongs to the metal film category. This is due to its robust construction, which offers both stability and durability in various operating conditions. It has a low self-inductance, and is still small enough to fit in tight spaces or even in high-density packaging.

The metal film resistor\'s working principle is based on the fact it has a very thin film of metal, usually a thick metal oxide deposited onto a substrate. This substrate has a specific electrical resistance that is dependent on the thickness of the metal film. When a current is applied, the metal film heats up and absorbs some of the energy. This causes the resistance of the resistive element to decrease and the amount of current is proportional to the voltage applied to it.

The HHV-50FR-52-51M is an excellent resistor for a variety of applications. It has very high stability and accuracy, a low temperature coefficient, and a very low self-inductance. It is resistant to shocks, vibration, humidity, and corrosion, and is small enough to fit in tight spaces. Additionally, its metal film construction makes it well-suited to many types of through-hole applications. The HHV-50FR-52-51M is not only reliable, but also cost-effective, making it a great choice for anyone in need of a precision through-hole resistor.

The specific data is subject to PDF, and the above content is for reference