HHV-50FR-52-59M

Through-hole resistors are a core electronic component and part of the traditional family of passive components. They have been used for decades in various circuits, but recently, with the increasingly integrated nature of modern electronics applications, resistance can now be found in various forms, from wire-wound resistors, chip resistors, thin film resistors, and more. Out of these various forms, today’s article will be looking at the HHV-50FR-52-59M resistor.

The HHV-50FR-52-59M is a through-hole (TH) resistor designed for use in high frequency and high current applications. As it is a through-hole resistor, it is simpler to install and more reliable than its surface-mount peers. The HHV-50FR-52-59M is a ceramic core resistor and features a low-noise construction, which makes it suitable for noise-sensitive applications. Its low inductance and high current capacity make it a good choice for circuits that require very low noise levels.

In terms of its physical form, the HHV-50FR-52-59M resistor is rectangular-shaped and features an open, ceramic casing. The dimensions are 50mm in diameter and 12mm in height, which makes it a good choice for space-restricted applications. Its frequency rating is up to 110 MHz, current rating is up to 2.4A and power rating is up to 10W. It has a resistance range of 10Ω - 2kΩ, with a tolerance of ± 5%. This makes the HHV-50FR-52-59M suitable for a wide range of applications from bypassing, clipping, and coupling through to power supply circuits.

The HHV-50FR-52-59M has a wide range of applications, from aerospace to automotive to consumer electronics. It is a great choice for audio equipment, industrial equipment, digital signal processors, and power supply protection circuits. Its low noise construction makes it ideal for noisy environments such as automotive ECUs, where the resistance has to be as low as possible in order to ensure the desired response time. Additionally, its low power rating makes it suitable for applications with limited space and power supply.

The working principle of the HHV-50FR-52-59M is simple; the resistance of the component is determined by the length of its path. The component is a resistive strip which carries a current in one direction and dissipates it in the other. The current follows the shortest path (with the least resistance) from one end of the strip to the other, and the resulting resistance is what determines the output voltage. The longer the distance between the two ends of the strip, the higher the resistance, and the lower the output voltage. This is how the HHV-50FR-52-59M produces its desired level of resistance.

Overall, the HHV-50FR-52-59M is a high-performance through-hole resistor with a wide range of applications. Its low noise construction and high frequency rating make it an ideal choice for high-frequency and low-noise applications such as automotive ECUs. Additionally, its resistance range and power rating make it suitable for a variety of other circuits. Its simple working principle helps to keep the cost down and provides an efficient means of producing the desired result.