HHV-50FR-52-820K

Series:	HHV
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	820 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors
Through hole resistors, also known as through hole resistors, are components used in the manufacture of electronic circuits. They are typically made of a layer of conducting material, such as copper or silver, which is then plated with an insulating material, such as varnish or plastic. The two plates are connected by conductive metal wires, which are then soldered into place. The holes in the through-hole resistor are punched through the insulation, so that the conducting material is exposed and can be in contact with other components. Through hole resistors are widely used in analog circuits, digital logic designs, computers, communication systems, and power electronics.
Application Field and Working Principle of HHV-50FR-52-820K Through Hole Resistor
The HHV-50FR-52-820K is a type of through hole resistor. It is a double layer network resistor manufactured using high voltage ceramic technology and is designed to handle higher voltage and power. It is commonly used in applications such as high voltage current limiting, temperature measurement, power factor correction, voltage balancing, motor braking, DC-DC converters, ac filter reactors, power amplifiers, and power supplies. The HHV-50FR-52-820K has a max. voltage rating of 52V and a max. power rating of 820KW.When a current passes through the resistor, the heat generated causes a resistance change which is proportional to the magnitude of the current and the resistance of the resistor material. This means that a higher current will cause a larger increase in resistance, and a higher resistance will cause a smaller increase in current. This means that the resistor can be used to limit the flow of current in a circuit, and, depending on the design, can be used to adjust or control the amount of current in a circuit.The HHV-50FR-52-820K through hole resistor also has an increased temperature range. This wider range of temperatures improves its performance and increases its longevity. The max. temperature rating is +155C, which is significantly higher than other through hole resistors. This allows the HHV-50FR-52-820K to be used in demanding applications such as sensing and controlling higher temperatures.Conclusion
In conclusion, the HHV-50FR-52-820K through hole resistor is an ideal component for designs requiring higher voltage and power capabilities. It is widely used in many applications, thanks to its wide temperature range and current/voltage limitation capabilities. It is a reliable and high-performance component that is capable of handling demanding applications.

The specific data is subject to PDF, and the above content is for reference