HHV-50FT-52-10M2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistors are electrical components that are used to regulate the flow of currents in circuits and systems. Through-hole resistors are those that are inserted directly into printed circuit boards (PCBs). HHV-50FT-52-10M2 is one of the common types of through hole resistors used today, both in industrial and in home applications. In this article, we will discuss the application field and working principle of HHV-50FT-52-10M2 resistors.

HHV-50FT-52-10M2 resistors, which are also known as flame-proof fusible power resistors, are designed for use as fusible resistors. They are commonly used in the protection of applications such as transformers, rectifiers, air conditioners, and photocopiers. The resistor can self-fuse when an overload, short-circuit, or other fault condition occurs in the system. The resistors can then be easily replaced when the fault has been cleared.

The design of the HHV-50FT-52-10M2 resistors is that of a ceramic-encased ceramic-core resistor. The core is composed of partially-sintered alumina or other ceramic material. This material has a low thermal quality factor, which means that the resistor can dissipate the large currents associated with faults very quickly. The ceramic material also provides a higher operating temperature rating than other types of through-hole resistors.

The design of the resistor also includes two small terminals, which are used to attach the resistor to its PCB. This type of through hole resistor has a higher current rating than other types of resistors, and is available in a wide range of resistance values. The most common resistance values are from 0.1 ohms to 100 ohms, although other values are also available.

The working principle of the HHV-50FT-52-10M2 resistor is simple. In normal operation, the resistor passes a current of up to 10A and the voltage across the resistor will be proportional to the current. If an overload or other fault condition occurs, then the resistance of the resistor will increase, resulting in a decrease in the current flowing through the resistor. This decrease in current will cause the voltage drop across the resistor to decrease, which will then cause the resistor to self-fuse, thus protecting the rest of the system from the fault.

The HHV-50FT-52-10M2 resistors are highly reliable and rugged devices that provide protection from damaging fault conditions in many electrical systems. They are a popular choice for industrial, domestic and commercial applications, especially in applications where a high degree of protection is required. In addition, they are relatively inexpensive when compared to other types of resistors.

In conclusion, HHV-50FT-52-10M2 resistors are designed for use as fusible resistors and are used in a variety of electrical applications. They are designed to be easy to install, provide high current ratings, and can quickly dissipate large fault currents. The resistors also provide protection from damaging fault conditions, and can be easily replaced when the fault has been cleared.

The specific data is subject to PDF, and the above content is for reference