HHV-50FT-52-10M7

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	10.7 MOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

HHV-50FT-52-10M7 Application Field and Working Principle

Through Hole Resistors are a type of resistors which are imbedded in a separate component and mounted on a board with two leads protruding from the component. This makes it easy to install and the leads are much larger than the tiny surface mount resistors, and therefore it can easily handle high voltage and high current compared to surface mount resistors. The HHV-50FT-52-10M7 is one such resistor which is used in several applications.The HHV-50FT-52-10M7 is manufactured by Cornell Dubilier Electronics (CDE) and it has a rating of 10,000Ω, 50 watts of power, 52mm body length and 10 MΩ insulation resistance. Its tolerance is 5% and it has a voltage rating of 250V. This through-hole resistor also features 35A current rating, a surge rating of 15kV, a non-inductive construction, and a high power rating of 500W. These features make this resistor suitable for high-power and high-voltage applications in Industries such as automotive, medical, aviation, consumer electronics, power sources, industrial, and military.The working principle of the HHV-50FT-52-10M7 is based on Ohm’s Law, where electrical resistance is equal to voltage divided by current. This means that the resistor converts AC or DC current into resistance. This is done by using a thin film of metal, such as tungsten or titanium, which is bonded to a ceramic substrate. The metal acts as a resistor, and when current passes through the resistor, it encounters the resistance of the metal and the electrical energy is dissipated into heat energy. As the current passes, the resistor\'s temperature increases and behaves linearly with the current, so that for a given voltage there is a corresponding current at the same amount of resistance.The resistor can also be used to change the voltage or current of a signal. This can be done by connecting a high resistance in series with a voltage source, such as a battery. This will cause the voltage of the source to decrease. Conversely, if a resistor is connected in parallel with a voltage source, the voltage of the source will increase. This process is known as voltage scaling and is used to reduce or increase current levels in devices.The resistance of the HHV-50FT-52-10M7 is maintained even when high temperatures are encountered. This is because the resistance is determined by the size of the metal and its distance from the ceramic substrate. As the temperature rises, the metal expands and its distance from the substrate increases. This reduces the electrical current that can pass through the resistor, and consequently the resistance increases. This ensures that the resistor can handle high voltage and high current, and that it will not fail under high temperature conditions.The HHV-50FT-52-10M7 is a versatile through-hole resistor which can be used in various application fields. Its high power rating, high voltage and current ratings, and non-inductive construction make it perfect for applications such as power sources, automotive, medical, aviation, industrial, military, and consumer electronics. Its working principle of converting current into resistance and its ability to maintain its resistance under high temperatures are what make the HHV-50FT-52-10M7 a trusted through-hole resistor.

The specific data is subject to PDF, and the above content is for reference