HHV-50FT-52-15M8

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	15.8 MOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors, also known as leaded resistors, are among the most commonly used types of resistors in electronic components. They are usually made of a combination of ceramic or metal substrate and a thin film of resistive material. The resistive material can be either carbon or metal and is usually applied in a Paste-In-Place (PIP) method, or printed onto the ceramic substrate.The HHV-50FT-52-15M8 is an example of a through hole resistor. It is rated at 15M8 Ohms in a 0.125 inch form factor. This resistor is designed for use in various signal conditioning circuitry and is suitable for moderate power applications. It helps to reduce or limit noise and other undesired signals in various applications, providing reliable and consistent performance.The working principle of through hole resistors is simple. When current is provided through them, they create a resistance to the current flow, thus limiting the amount of current that can flow through the device. This resistance restricts the amount of current that is available from the source and is known as the resistor’s power rating.Due to their resistance to current, through hole resistors are ideal for applications that require a low amount of current. These include circuit protection, signal conditioning, audio equipment, and measuring and controlling systems. They can also be used in high power circuits, such as automotive power systems, to effectively limit the electrical power of certain components.Through hole resistors can have levels of power ratings ranging from low values, suitable for small circuits, to high values, which are used in applications with high current and voltage requirements. The selection of the appropriate resistor should be done carefully dependent on the current flow that is necessary to achieve the desired performance.In conclusion, through hole resistors are a reliable and dependable type of resistor that can be used in numerous circuits. They provide resistance and can limit current flow, allowing for the necessary levels of current and voltage for a variety of applications. The HHV-50FT-52-15M8 is an example of a through hole resistor that is often used in signal conditioning and other low power applications.

The specific data is subject to PDF, and the above content is for reference