HHV-50FT-52-18M2

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	18.2 MOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are a type of resistor used in electronic components to regulate current or voltage in an electrical circuit. The most common type of Through Hole Resistor is called the HHV-50FT-52-18M2. It is a general-purpose resistor that provides easy and inexpensive solutions to a variety of applications. The HHV-50FT-52-18M2 Through Hole Resistor is a high-voltage, fast-acting, low-leakage, 5 watt, precision resistor with a numerical value of 52 ohms and a tolerance of 18%. It features a five-layer base-oxide bonded with metal end caps and a ceramic substrate, making it very durable and versatile. The HHV-50FT-52-18M2 resistor has an operating temperature range from -25C to 107C and is suitable for use in a wide range of applications including signal processors, switching power supplies, servo motors, motor controls, telecommunications, and consumer electronic equipment. It is also capable of dissipating heat well and can withstand high voltages and currents, making it especially suitable for high power applications. The working principle of the HHV-50FT-52-18M2 Through Hole Resistor is simple. When current passes through the resistor, it creates heat. This heat is converted to electrical energy that is dissipated from the resistor as heat in the form of thermal energy. This dissipated energy is proportional to the current passing through the resistor and is inversely proportional to the resistance. The greater the current passing through the resistor, the greater the amount of heat dissipated from the resistor. Thus, the resistance can be controlled by adjusting the voltage and current passing through the resistor. Apart from its use in electronic components, the HHV-50FT-52-18M2 Through Hole Resistor is also useful for measuring applications, particularly in situations where precise measurements are required. A precision voltage divider circuit can be created by connecting two resistors in series, which can then be used to measure the voltage in a circuit with an acceptable accuracy. By using the appropriate values of resistors, the voltage drop across the resistors can be accurately determined, thereby providing the required measurement.The HHV-50FT-52-18M2 Through Hole Resistor is a reliable, durable, and versatile device that is suitable for use in a variety of applications. Its resistance value, tolerance, temperature range, and power dissipation capabilities allow it to be used in many situations where precise measurements and control of current is required. This makes it an ideal and cost-effective solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference