HHV-50FT-52-1M24

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	1.24 MOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are important electrical components that are widely used in the construction of withstanding elements in almost any type of electronic device or circuit. A standard example of through hole resistors is the HHV-50FT-52-1M24, which is a radial-lead resistor with a heat-sensitive ceramic body, spring arms, and a high temperature tolerance resistance of 1MΩ. This type of resistor is normally used to limit the current in DC or AC circuits.

Application Field

The HHV-50FT-52-1M24 is suitable for use in a wide variety of industries such as communications, medical, automotive, security, and other industries. Due to its high temperature tolerance, the resistor has found application in small signal circuits that require precise and reliable current regulation, such as amplifier outputs. It is also useful in high power circuits that need current limiting protection, such as battery-operated alarm or sensor systems.

Working Principle

The working principle of the HHV-50FT-52-1M24 relies on the familiar Ohm’s Law. This states that the electricity flowing through a conductor is directly proportional to the potential difference (voltage) across it and inversely proportional to the resistance. In other words, increasing the resistance will reduce the current flow.The resistor is made of a specific material that limits the flow of current depending on the amount of voltage applied. As voltage passes through the resistor, the current is reduced as it passes through the material. The rate of reduction of current is affected by the amount of resistance in the resistor. This type of resistor is made up of an insulating material infused with a metal alloy, such as nickel, to increase its resistance to current.The number of Ohms of resistance, indicated on the resistor, determines the amount of current the resistor will let through. The higher the number of Ohms, the more resistance offered to the current. As a result, the greater the voltage applied, the more current will be stopped from flowing. The maximum amount of voltage that can be tolerated without suffering critical damage is known as its maximum voltage rating.The HHV-50FT-52-1M24 is specifically designed to create a nominal resistance of 1MΩ and is ideal for applications that require low heat buildup. Its heat-sensitive body and spring arms help to regulate and dissipate any large amounts of heat that could be generated during times of increased current.

Conclusion

The HHV-50FT-52-1M24 is a reliable, versatile, and high-temperature-tolerant resistor that has many applications in different industries. Its resistance-modulating working principle makes it a useful tool for regulating the current flow in both AC and DC circuits. Its heat-sensitive body and spring arms help to dissipate any heat buildup, making it even more reliable and suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference