HHV-50FT-52-24M9

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are an integral part of many electrical and electronic devices. The HHV-50FT-52-24M9 is a type of through hole resistor that is used to limit current flow or voltage imbalances in signal lines. It is commonly found in applications such as low to medium power equipment, electronic measurements, and signal conditioning circuits.

The HHV-50FT-52-24M9 resistor has two parts: an insulating material with a coil of resistance such as copper or silver and a terminal. The resistance of the through hole resistor depends on the resistance of the coil material and how much of it is used. This resistor is available in 1/5W, 1/2W, 1W, 2W, 3W, 4W, 4.5W, 5W, 6W and 8W resistors. The resistance range can be from 10Ω, 12Ω, 15Ω to 100KΩ.

When current passes through the resistor, a set amount of voltage is dropped across the resistor, as opposed to the full voltage that is present in the line. The resistor can be used to control the currents passing through the line, preventing it from becoming overloaded or unpredictable. It can also be used to prevent mismatches between the input and output signals.

The working principle of the HHV-50FT-52-24M9 is fairly simple. When current passes through it, the current-carrying wire in its coil converts electrical energy into heat, which is then dissipated into the surrounding air. Therefore, the amount of current that the resistor can handle is limited by the wire in the coil. The more current that passes through, the higher the temperature and, hence, the higher the resistance.

Through hole resistors like the HHV-50FT-52-24M9 are used in a wide range of applications, such as consumer electronics, telecommunications, automotive, military, medical, aerospace, and industrial applications. They are used to control the current and voltage in certain circuits, as well as preventing short circuits. In addition, they can be used for noise filtering and noise reduction in audio circuits.

The HHV-50FT-52-24M9 is designed for low to medium power applications, as it has a large resistance coil and is able to handle up to 5 Watts of power. It is also highly reliable and can withstand temperatures up to 105°C. It is one of the most commonly used through hole resistors in the electronics industry.

The specific data is subject to PDF, and the above content is for reference