HHV-50FT-52-3M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are the most common or popular type of resistors. This type of resistor is typically mounted to a printed circuit board and consists of a ceramic or metal tube with two holes for wires. The wires are used to connect the resistor to the board, which grants a low-resistance path for electrical currents. The main purpose of these resistors is to limit the flow of current in either AC or DC circuits, allowing the circuit board to operate safely and reliably.

The most typical type of Through Hole Resistor is the HHV-50FT-52-3M. This model is made from high performance metal alloy ceramic tube, which is why it is ideal for applications with a high-current load. The contact end of the resistor has two large diameter leads that are easily connected to the circuit board. The resistance element is protected from overcurrent by a special coating that protects the internal components from harm. Its construction makes it suitable for both AC and DC applications, while its dimensions allow it to fit the standard hole sizes used in most PCB (printed circuit boards).

The working principle of HHV-50FT-52-3M resistor is based on Ohm\'s law. This law states that the resistance of a resistor is measured by the formula R = V/I, where V is the voltage, I is the current, and R is the resistor. When an electrical current flows through a resistor, the electrical charge is converted into heat. Thus, by controlling the amount of resistance, you can control the amount of current allowed to pass through the resistor. Because of its special construction, the HHV-50FT-52-3M resistor can handle up to 50 watts of continuous current, meaning it is suitable for devices that require a lot of current, such as lighting systems and motors.

 HHV-50FT-52-3M resistor is also designed to reduce electrical noise interference. This makes it ideal for certain applications, such as medical devices and stereos, where accurate signal transmission is necessary. The resistor also helps to limit the heat generated by electrical components, ensuring that the device stays cool and doesn\'t overheat. Furthermore, because the resistor does not heat up very quickly, it can handle high power loads without affecting the surrounding electronic components.

The HHV-50FT-52-3M resistor is often used in a variety of applications due to its robust construction, high power handling capacity, and ability to reduce electrical noise. It is suitable for automotive, automotive electronics, entertainment electronics, food processing, medical, telecommunications, and UPS systems. It is also often used to protect sensitive components in circuits and as part of static logic. Because of its wide range of uses, the HHV-50FT-52-3M resistor has become one of the most popular Through Hole Resistors available.

The specific data is subject to PDF, and the above content is for reference