HHV-50FT-52-51M

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	51 MOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through-hole resistors are a type of resistor with two leads, and are typically made from a small cylindrical or rectangular shaped body. They’re often made from ceramic or plastic and often use metal oxide films as resistors. Through-hole resistors are widely used in a variety of electronic circuits, such as in power supplies, electronic watches, satellite communications, and audio systems. One type of through-hole resistor is the HHV-50FT-52-51M. It is a ceramic resistor that is used for high voltage and temperature applications. It is able to resist up to 50 volts and is capable of withstanding up to 52mA of current. The HHV-50FT-52-51M is a resistor that is used in various electronic components, such as transistors, capacitors, and resistors. Its primary use is for applications that require the high voltage resistance and temperature capability. This type of resistor is typically used in power supplies, amplifier stages, digital components, and voltage regulators, where high-voltage and temperature conditions occur. The working principle of the HHV-50FT-52-51M is based on Ohm’s Law, which states that the current passing through a conductor is directly proportional to the voltage applied across it. This law allows the resistor to adjust the current passing through it, thereby controlling the amount of current flowing through a circuit. The HHV-50FT-52-51M is constructed with a ceramic body and metal oxide resistors. The ceramic body is designed to handle the high-voltage and temperature conditions that occur in various electronic components. The metal oxide resistors are also designed to resist the current that is flowing through the circuit. The ceramic body is designed to dissipate the heat generated from the current that is passing through the resistor. This helps to ensure that the components can withstand the high temperature conditions and remain operational at all times. In summary, the HHV-50FT-52-51M is a ceramic resistor that is used for high voltage and temperature applications. It is particularly useful for applications that require a high degree of heat resistance and voltage resistance. The resistor is constructed with a ceramic body and metal oxide resistors and operates based on Ohm’s law. The ceramic body is designed to dissipate the heat generated from the current that is passing through the resistor, while the metal oxide resistors are designed to resist the current that is flowing through the circuit. The HHV-50FT-52-51M is widely used in power supplies, amplifiers, digital components, and voltage regulators.

The specific data is subject to PDF, and the above content is for reference