| Allicdata Part #: | HHV-50FT-52-5M11-ND |
| Manufacturer Part#: |
HHV-50FT-52-5M11 |
| Price: | $ 0.03 |
| Product Category: | Resistors |
| Manufacturer: | Yageo |
| Short Description: | RES MF 1/2W 1% AXIAL |
| More Detail: | 5.11 MOhms ±1% 0.5W, 1/2W Through Hole Resistor Ax... |
| DataSheet: |  HHV-50FT-52-5M11 Datasheet/PDF |
| Quantity: | 1000 |
| 5000 +: | $ 0.02501 |
| Series: | HHV |
| Packaging: | Tape & Box (TB) |
| Part Status: | Active |
| Resistance: | 5.11 MOhms |
| Tolerance: | ±1% |
| Power (Watts): | 0.5W, 1/2W |
| Composition: | Metal Film |
| Features: | Flame Retardant Coating, High Voltage, Safety |
| Temperature Coefficient: | ±200ppm/°C |
| Operating Temperature: | -55°C ~ 155°C |
| Package / Case: | Axial |
| Supplier Device Package: | Axial |
| Size / Dimension: | 0.130" Dia x 0.354" L (3.30mm x 9.00mm) |
| Height - Seated (Max): | -- |
| Number of Terminations: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Through Hole Resistors are important components for the majority of the electronics projects of engineers and technicians. The most popular of these high-voltage resistors is the HHV-50FT-52-5M11, which is used for the voltage range from 100V to 200V. This resistor has a high capacity, high resistance, and low-temperature stability, making it suitable for various high-voltage applications.
The application field of the HHV-50FT-52-5M11 is mainly in the power and industrial, motors control and voltage regulation. This resistor is used to reduce the voltage in power electronics, motors control, and voltage regulation. It is also widely used in the aviation, telecommunication, and medical industries where high-voltage protection is needed. This type of resistor allows for excellent control over the dynamic behavior of the power circuit and its component.
The working principle of the HHV-50FT-52-5M11 is based on the use of a resistance element, typically made of silver or zinc oxide, to resist an electric current. The resistor is connected to the power source and the load and it acts as a barrier between them. The resistor will reduce the current flow through the power source and load, while also limiting the voltage that is produced in the power circuit. The resistor will also control the impedance, which is the ratio of current to voltage. Resistor selection is based on the expected power dissipation, which means that the current and voltage of the application should be within the rated limits.
To ensure reliable operation, the HHV-50FT-52-5M11 should be tested and verified with a calibrated resistance meter before being applied to an application. Proper installation of the resistor is also important in order to avoid any short circuits which can damage other components on the board. Maintenance is also important in order to maximize its lifespan.
The HHV-50FT-52-5M11 is a high-voltage resistor with good performance and reliability, making it an ideal choice for various industrial and power applications. The working principle and application field of this resistor allow it to be utilized in a wide range of applications such as power electronics, motors control, and voltage regulation. Proper installation, testing, and maintenance are necessary to ensure reliable operation and maximize its lifespan.
The specific data is subject to PDF, and the above content is for reference
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...