Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	6.2 MOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Introduction

Through Hole Resistors (THRs) are a type of electrical components that limit or regulate the flow of electricity in a circuit. This type of resistor has two or more terminals and has two leads that are soldered to the circuit board. Through Hole Resistors are made up of a metal alloy wire that is wound around an insulating core and is then covered in a protective material for heat dissipation. These components are commonly used in applications where a high power of electricity needs to be dissipated over a large area.

HHV-50FT-52-6M2 application field and working principle

The HHV-50FT-52-6M2 is a Through Hole Resistor. It is used in applications that require more than the normal five Watt rating such as appliances, circuit boards, and the like. This type of resistor is designed to work at specified frequencies and can handle higher current than standard resistors.The HHV-50FT-52-6M2 resistor is a power resistor. It is rated for up to fifty Watts and has a nominal resistance of 52 ohms. Its features include an all metal frame, over voltage protection, over current protection, and over fusing protection. It also features a flame retardant coating for additional safety.The working principle of a Through Hole Resistor is relatively simple. When current passes through the resistor, it creates an electric field that opposes the current direction. This opposing field generates an opposing voltage, which is equal to the voltage being applied to the resistor. The current passing through the resistor is equal to the amount of current being stopped by the resistor. By this principle, Through Hole Resistors are able to limit the amount of current in the circuit.

Conclusion

Through Hole Resistors are an essential component for any electronic circuit and are used in a variety of applications. The HHV-50FT-52-6M2 is a specific type of Through Hole Resistor that is used in applications with higher power requirements. It has several features that ensure that the circuit remains safe from current and voltage fluctuations. By understanding the working principle behind Through Hole Resistors, one can better design a circuit that is suitable for its intended application.

The specific data is subject to PDF, and the above content is for reference