HHV-50FT-52-806K

Series:	HHV
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	806 kOhms
Tolerance:	±1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Flame Retardant Coating, High Voltage, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.130" Dia x 0.354" L (3.30mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors and the HHV-50FT-52-806K

Through hole resistors are a type of resistor widely used in electronics. They are a wire wound resistor with a fixed resistance value and use two holes drilled through the body of the resistor, as their name implies, to connect to the circuit. These components are generally quite reliable and especially suitable for applications requiring high current or high power.The HHV50FT-52-806K is a wire-wound through‐hole resistor which has a total resistance value of 50 ohms. It is a high resistance resistor which is suitable for current airflow measurements where a high resistance is needed, such as in air flow sensors. It can also be used in high voltage circuits as it can handle up to 800 volts in the rated power.The outer casing of the resistor is made of a ceramic material, with a length of 52 mm and a diameter of 8 mm. The body of the resistor is made of a metal alloy and the inside of the resistor is filled with a resistive material, usually a carbon or metal oxide film, which is essentially two layers of thin metal stripes separated by an insulating layer. This gives the resistor a high resistance value and also allows it to withstand high temperatures.The HHV50FT-52-806K is non-inductive and has a maximum operating temperature of 250 °C, a power rating of 0.2 Watts, and a tolerance of ±10%. It also has a high insulation resistance and can withstand a high-voltage pulse for a short period of time.The resistor is designed to be connected in two ways. The first way is to connect it directly to a circuit board, as the two holes drilled through the body of the resistor are large enough for standard PCB connection wires. The second way is to solder it directly onto a printed circuit board, which then has to be connected to the circuit with wires. Either way, it is important to ensure that the connections are properly soldered to avoid any short circuits.The HHV50FT-52-806K is a great choice for applications where a high resistance is needed, such as air flow sensors, current measurement, and high voltage circuits. It is durable, reliable, and reliable and can withstand high temperatures. It is important to check the power rating, tolerance, and maximum operating temperature before connecting it to a circuit.

The specific data is subject to PDF, and the above content is for reference