HHV1WSJT-52-1M6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are widely used in many different types of electronic circuit designs. The HHV1WSJT-52-1M6 is a popular choice for many applications due to its relatively low cost and large range of operating temperatures. This component is a vertical, through-hole resistor type (THR-1) with a minimum tolerance of 0.5% and an initial temperature coefficient of 200ppm/degree C.

The HHV1WSJT-52-1M6 is a carbon film resistor with a cylindrical body, a body diameter of 0.55” (14mm), a height of 1.00” (25.4mm), and four flat radial terminations which are soldered through the printed circuit board. The resistor’s electrical characteristics include a working voltage of 2W, a resistance range from 10Ω–1MΩ, and a dissipation rate of 1/2W.

HHV1WSJT-52-1M6 is a typical through-hole resistor used in many different applications. For example, it can be used in electric circuits to adjust current, signal attenuation, filter noise and overload protection. It is usually found connected in parallel with power-supply shut off pins and in series with components requiring current protection. It can also be used to maintain voltage regulation in power supplies, or as an attack-resistance across remote controls.

The working principle of HHV1WSJT-52-1M6 is based upon the Ohm\'s Law. The resistor has a set of metal wires that when subjected to a current, produces a voltage that is proportional to the resistance. This is known as a voltage drop across the resistor. When an electrical current passes through the resistor, electrons travel along the wires, making collisions with the metal electrodes and generating heat. This heat is called power dissipation. The power dissipation is what limits the maximum current that can be subjected to the resistor and is calculated using the formula P=VI, where V is the voltage and I is the current.

The minimum working voltage, resistance, and power dissipation are the three important parameters of the HHV1WSJT-52-1M6. These parameters are essential in successfully implementing the resistor in the design. To ensure that the resistor meets the design requirements, it is necessary to calculate the parameters appropriately. Additionally, the resistor should be inspected regularly for any visible signs of wear or damage, which can result from heat, moisture, dirt or vibration.

The HHV1WSJT-52-1M6 is a through hole resistor designed to provide reliable performance and accurate electrical characteristics in a variety of applications. This resistor type is ideal for power supplies, motor controllers, and other circuits where precision and stability is critical. With its minimum tolerance and temperature coefficient, this type of resistor is suitable for many uses.

The specific data is subject to PDF, and the above content is for reference