Allicdata Part #: | 1127-3715-ND |
Manufacturer Part#: |
HMC-C005 |
Price: | $ 0.69 |
Product Category: | RF/IF and RFID |
Manufacturer: | Analog Devices Inc. |
Short Description: | INGAP HBT DIVIDE-BY-2 MODULE 0.5 |
More Detail: | RF IC Divide-by-2 VSAT 500MHz ~ 18GHz Module |
DataSheet: | HMC-C005 Datasheet/PDF |
Quantity: | 1 |
1 +: | $ 0.63000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Function: | Divide-by-2 |
Frequency: | 500MHz ~ 18GHz |
RF Type: | VSAT |
Secondary Attributes: | -- |
Package / Case: | Module, SMA Connectors |
Supplier Device Package: | Module |
Base Part Number: | HMC |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Misc ICs and Modules refer to a variety of radio frequency or microwave integrated circuits and modules, which can provide various RF functions. This article focuses on the application field and working principle of the HMC-C005 RF module:
Application field of HMC-C005
The HMC-C005 is a very compact RF module designed for applications requiring various levels of RF amplifier functions. It is a cost-effective solution for a wide range of RF applications, and is commonly used in consumer electronics such as RF receivers, TV tuners, satellite receivers, and Wi-Fi transmitters. It is also suitable for medical, automotive, navigation, and communication system applications.
Working Principle of HMC-C005
The HMC-C005 is an integrated circuit (IC) that consists of a system-on-chip (SoC) and two monolithic microwave integrated circuits (MMIC). It operates in the frequency range between 27.0 and 1575.42 MHz. The SoC houses a power amplifier (PA) and a low-noise amplifier (LNA) as well as a voltage-controlled oscillator (VCO), a phase-locked loop (PLL), and signal-processing logic circuitry. The PA and the LNA can be configured independently, and the output power can be adjusted accordingly. The LNA provides an additional gain, and the PA provides an additional output power boost. The signal-processing logic circuitry provides the required logic functions to ensure the proper operation of the HMC-C005.
The operational process of the HMC-C005 starts with the input signal being received by the LNA. The signal is then filtered, amplified, and gain properly adjusted by the LNA. The signal is then sent to the PA for further amplification. The signal is then fed to the VCO. The VCO then modulates the signal to the desired frequency. The signal is then filtered and amplified by the PLL, and the signal is sent to an antenna for transmission. The HMC-C005 also has a power detector circuit that monitors the signal power, which can be used to adjust the power output accordingly.
Conclusion
The HMC-C005 provides a cost-effective solution for various RF applications. It is a highly integrated RF module that consists of system-on-chip, low-noise amplifier, voltage-controlled oscillator, phase-locked loop, and signal-processing logic circuitry. Its operational process starts with receiving the input signal by the LNA and ends with the signal being sent to an antenna for transmission. The power detector circuit is also included to monitor the signal power and adjust the power output.
The specific data is subject to PDF, and the above content is for reference
IC ANTENNA DIVERSITY 20-SOICRF IC Antenn...
IC MMIC I/Q UPCONVERTER 32SMDRF IC Upcon...
IC BUFFER/SPLITTER LO 20-TQFNRF IC LO Bu...
IC LNA/MIXER CDMA 28-TQFNRF IC LNA/Mixer...
TRF2432IRTQRG3RF IC IQ/IF Transceiver 80...
IC AM/FM RECEIVER 44SSOPRF IC AM/FM Rece...