HMC1010LP4E

Series:	--
Packaging:	Cut Strip
Part Status:	Active
Frequency:	0Hz ~ 3.9GHz
RF Type:	General Purpose
Input Range:	-50dBm ~ 10dBm
Accuracy:	±1dB
Voltage - Supply:	4.5 V ~ 5.5 V
Current - Supply:	50mA
Package / Case:	24-VFQFN Exposed Pad
Supplier Device Package:	24-QFN (4x4)
Base Part Number:	HMC1010

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

.

Introduction

The HMC1010LP4E is a low-noise, high-performance, high-conversion-rate RF detector. It is designed specifically for RF detection and has been developed with extensive testing, validation, and verification methodologies. This detector is suitable for a wide range of applications requiring precise, fast, and reliable detection of RF signals, from simple communications to more complex wireless technologies.

Classification of HMC1010LP4E as an RF Detector

The HMC1010LP4E is classified as an RF detector and is suitable for detecting and measuring RF signals in a variety of applications. An RF detector is a device that converts RF energy into a electrical signal of varying amplitude. The HMC1010LP4E uses a variety of different technologies to detect and measure the power of RF signals. The HMC1010LP4E is specifically designed for applications requiring a reliable and fast response to detect and measure the power of RF signals.

Application Field and Working Principle of HMC1010LP4E

The application field of HMC1010LP4E is typically confined to applications requiring the detection and measurement of RF signals that are of relatively low power. Examples of typical applications are automotive, industrial, medical, and consumer products. The working principle of the HMC1010LP4E is based on the conversion of RF signal energy into a electrical signal. The HMC1010LP4E converts the RF signal into an electrical signal in two stages. First, the signal is amplified and then, the amplification is rectified to produce a voltage that is proportional to the input RF signal. The voltage produced is then processed to produce a measurement of the signal strength (expressed in Watts or decibel). The HMC1010LP4E is able to measure the amplitude of the RF signal accurately and quickly over a wide range of frequencies, from about 500MHz to about 4GHz. The device has a very low noise figure, which is an important factor in the measurement of signals with very low power levels. The HMC1010LP4E can detect signals with a minimum detectable power of -30dBm. This wide frequency range and low noise figure make the HMC1010LP4E suitable for a variety of applications, such as automotive, industrial, medical, and consumer products.The HMC1010LP4E also features a wide dynamic range and can detect signals with an amplitude up to +20dBm. In addition to this, the HMC1010LP4E has a fast response time of 10ms for a 100% signal detection rate. This fast response time ensures that any sudden changes in the signal power are detected quickly and accurately.In addition to the features mentioned above, the HMC1010LP4E has a wide range of digital features to ensure reliable and efficient operation. The device has an I2C interface, which allows for fast and easy communication with other electronic devices. The HMC1010LP4E also features an integrated temperature sensor, which allows the device to monitor and control its own internal temperature. This prevents the device from overheating due to prolonged use or in other harsh environmental conditions.

Conclusion

The HMC1010LP4E is a advanced and reliable RF detector. It is suitable for applications requiring precise, fast, and reliable detection of RF signals. It has a wide frequency range and low noise figure, a wide dynamic range, and a fast response time. In addition to these features, the HMC1010LP4E has an I2C interface and an integrated temperature sensor, which allow for fast and easy communication with other electronic devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description