HMC129

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers are the most basic components in communication systems, as they are responsible for converting a frequency signal to another frequency. The HMC129 is a high-performance, low-noise, monolithic mixer designed specifically for formal applications. This RF mixer is capable of working over the frequency range of DC to 6GHz and handling input powers up to 10dBm.

The HMC129 was designed to meet the stringent requirements of physical layer signals in wireless systems. Working with a 50 Ω impedance at the inputs and outputs, this RF mixer uses an LO Buffer to minimize distortion. The LO Buffer also features low noise and low third order intermodulation (IM3) products, allowing the HMC129 to deliver a smooth, low distortion signal.

The HMC129 features amazing conversion gain and low noise figure, with a conversion gain of 14dB and a noise figure of 15dB. This greatly improves the signal-to-noise ratio of the mixer, allowing it to work with a low signal-to-noise ratio without introducing distortion. This makes it perfect for applications in communications, instrumentation and test.

The HMC129 also features extremely low phase noise with an Ultra-low phase noise of -170dBc/Hz for an input frequency of 500MHz. The mixer also has excellent 2nd order intercept point of +12dBm, which helps to reduce signal distortion. Not only that, but it also has excellent LO-RF isolation of -55dBc, further reducing distortion.

The HMC129 is an ideal mixer for applications where a low noise figure, high linearity, and high gain are desirable. The high power handling of this mixer makes it suitable for a wide range of applications, from low-noise amplifiers to direct conversion receivers. It can also be used in medical imaging systems, wireless base stations, and military communication equipment.

The working principle behind the HMC129 is quite simple. This mixer works by mixing an incoming RF frequency signal with an LO signal. This produces an output signal at the desired frequency, with the power level and other parameters depending on the relative powers of the input signals. The mixer\'s performance depends on several factors such as the level of the LO signal, the amplitude of the input signal, and the quality of the components used.

The HMC129 is a high performance, low noise, monolithic RF mixer capable of working over the DC to 6GHz frequency range and handling power inputs up to 10dBm. The mixer provides an Ultra-low phase noise of -170dBc/Hz for an input frequency of 500MHz, and excellent return loss and gain. It also features excellent third order distortion products, low noise figure and excellent conversion gain along with excellent 2nd order intercept point. The mixer is also capable of handling high power input levels, making it ideal for applications including low-noise amplifiers and direct conversion receivers. The working principle behind the HMC129 is fairly simple, as it mixes an incoming RF frequency signal with an LO signal to produce the desired output signal.

The specific data is subject to PDF, and the above content is for reference