HMC558ALC3B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF mixers are among the most commonly used components in the field of radio frequency (RF) processing. The HMC558ALC3B is a high-performance active RF mixer module that is widely used in various applications such as direct conversion receivers, wideband broadcast equipment, and multiple standards wireless basestation receivers. It features a wide operating frequency range from 6GHz to 26GHz, low conversion loss of less than 10dB, low power consumption of 65mW, and high linearity of more than 20dB.

The HMC558ALC3B is a three port active mixer, of which one port is port 1 (LO), one is port 2 (RF), and the third is port 3 (IF). It works on the basic principle of nonlinear conversion of microwave signals. The active mixer uses an integrated active device such as a transistor, diode, or FET to convert input signals from one frequency to another. The LO port is connected to the signal source whose frequency needs to be converted. The RF port is connected to the input frequency signal to be converted. The mixers then operate based on the principle of nonlinear mixing of two different frequencies. The IF port is then connected to a post-filter or amplifier circuit that converts the frequency signals to the desired frequency.

The HMC558ALC3B has a variety of uses in different kinds of applications. It is commonly used in direct conversion receivers, which are used in wireless base stations, cellular, satellite, RFID, and short range point-to-point communication systems. It is also used in wideband broadcast equipment, where it can be used to convert the incoming RF signals to lower frequencies that can be further processed by a baseband receiver. The mixer is also used in wideband wireless communication systems to convert incoming signals to an intermediate frequency that can be further processed by a receiver.

In addition to its application in receivers and transmitters, the HMC558ALC3B can also be used in low-noise amplifiers (LNAs) and attenuators. In LNAs, it can be used to improve the signal-to-noise ratio (SNR) of incoming signals. It can also be used in upsampling applications, where it can be used to increase the frequency of an incoming signal while still preserving its bandwidth. In attenuators, it can be used to reduce the level of an incoming signal while still maintaining the same bandwidth.

The HMC558ALC3B is a widely used RF mixer due to its wide operating frequency range and high linearity. It is an excellent solution for a variety of applications, from direct conversion receivers and wideband broadcast equipment to multiple standards wireless basestation receivers. Its low power consumption, low conversion loss, and quality performance make it an attractive choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference