HRF-AT4610-FL-TR RF/IF and RFID |
|
Allicdata Part #: | 342-1048-2-ND |
Manufacturer Part#: |
HRF-AT4610-FL-TR |
Price: | $ 3.88 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | ATTENUATR 31.5DB 6BIT PAR 24VQFN |
More Detail: | RF Attenuator 31.5dB 0Hz ~ 4GHz 50 Ohms 24-VQFN ... |
DataSheet: | HRF-AT4610-FL-TR Datasheet/PDF |
Quantity: | 1000 |
2500 +: | $ 3.52170 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Attenuation Value: | 31.5dB |
Frequency Range: | 0Hz ~ 4GHz |
Power (Watts): | -- |
Impedance: | 50 Ohms |
Package / Case: | 24-VQFN Exposed Pad |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are a type of passive device commonly used in the fields of radio frequency (RF) and microwave communications. They are used to reduce the power of a signal, or to prevent signal overloading of sensitive components. The HRF-AT4610-FL-TR is an Attenuator produced by the company AVX. This article will discuss the application field and working principle of the HRF-AT4610-FL-TR.
The HRF-AT4610-FL-TR is a high power chip Attenuator designed for use in a variety of RF and wireless applications. It is manufactured using a combination of ceramic and metal materials for superior RF and thermal performance. It is designed for use over a wide frequency range, from DC to 30GHz, and supports 4V to 20V peak voltage.
The HRF-AT4610-FL-TR is used in many applications where it is necessary to reduce the signal strength in order to prevent signal overload or gain control. It is commonly used in radio transmitters for gain control of power amplifiers and in high powered transmit-receive systems which require high linearity and system gain control. The attenuator is also used in a variety of other RF and microwave applications including antenna systems, test and measurement equipment, and wireless communication systems.
The HRF-AT4610-FL-TR works by reducing the power of a signal as it passes through its component parts. This attenuation is achieved by creating an impedance mismatch between the input and output ports of the Attenuator. The impedance mismatch prevents the signal from passing through unchanged, and thus reduces the power of the signal. The amount of signal reduction is dependent on the amount of mismatch created, and on the power of the signal.
The main advantage of the HRF-AT4610-FL-TR is its high linearity and high accuracy. It has a low insertion loss and is also highly reliable. The attenuator also has a low return loss, meaning it has low signal reflections, which is important for reducing noise in the system.
In summary, the HRF-AT4610-FL-TR is a high power chip Attenuator designed for use in RF and wireless applications. It works by creating an impedance mismatch between the input and output ports, thus reducing the signal power. The HRF-AT4610-FL-TR has excellent linearity and accuracy, low insertion loss and low return loss. It is therefore ideal for applications requiring gain control or signal overloading protection.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...