HS10 330R J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors (CMRs) are a relatively new type of resistor that offer advantages over conventional axial-leaded resistors. These small, inexpensive components are widely used in electronics to provide electrical insulation and reduce electrical noise. HS10 330R J is a type of CMR, specifically designed for use on chassis mount circuit boards. The device features a black-anodized aluminum body with gold-plated contacts, and is designed to be used in applications ranging from power supplies and signal filtering to motor controller applications.

The HS10 330R J CMR is an ideal choice for chassis mount applications due to its small size and its ability to fit into tight spaces. Because it is soldered directly to a circuit board, there is no need for additional wire routing or soldering. The device is also designed to provide a high level of electrical insulation, so electrons will not escape and interfere with other components on the board. Additionally, the gold-plated contacts of the HS10 330R J provide improved contact reliability over traditional resistors, resulting in increased performance and reliability.

The HS10 330R J CMR consists of a two-sided design, with a contact plate and an insulation plate. The contact plate is made from metal and is bounded with a thin layer of insulation material, such as polystyrene or polypropylene. The contact plate is then securely fastened to the body of the device, using either a screw or adhesive. The insulation plate is typically made of an insulating material, such as polyvinyl chloride or acrylonitrile-butadiene-styrene resin, and attached to the contact plate. This ensures that electrons are contained and do not escape, preventing interference with other components.

The HS10 330R J CMR works by providing resistance to the electric current flowing through it, in order to regulate and control the voltage level. This is done by providing a specific amount of resistance that increases as the amount of current passing through the resistor increases. The amount of resistance provided is determined by the size and type of material used in construction of the CMR. For example, larger resistors have more resistance and are better suited for high voltage applications. Smaller resistors, on the other hand, are generally better suited for applications with lower voltages, such as signal filtering and noise reduction.

In addition to providing electrical insulation and resistance, chassis mount resistors, such as the HS10 330R J CMR, are also ideal for motor controller applications. This is because the devices are designed to provide high current capacity, low thermal resistance, and superior impact resistance. This makes them well-suited for use in devices such as linear DC motor controllers, which require the ability to control the speed of the motor in both forward and reverse directions.

In summary, the HS10 330R J CMR is a high-performance component designed for use in chassis mount applications. Its small size and gold-plated contacts make it an ideal choice for applications such as signal filtering, power supplies, and motor controllers. The device is designed to provide electrical insulation, high current capacity, and superior impact resistance. Additionally, the device is designed to provide a specific amount of resistance that increases as the amount of electrical current passing through it increases, allowing it to regulate and control the voltage level.

The specific data is subject to PDF, and the above content is for reference