HSC3006R8J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis mount resistors are a type of component used in electronic engineering, which are typically used to block or adjust electrical conductivity in a circuit. The HSC3006R8J is an example of a chassis mount resistor, and it is popular due to its small size and low cost. This article will discuss the application of the HSC3006R8J, its working principle, and how it is used in circuit design.

The HSC3006R8J is a quarter-watt resistor, meaning that it can handle a maximum current of 250 mA. It is a carbon film resistor, which means that it is composed of a carbon film deposited on a substrate and then enclosed in an insulating tube. The resistor is available in a range of values, ranging from 10 ohms to 1 M ohm. The resistor has a tolerance of ±5%, which means that the resistance value of the resistor can vary by up to 5%.

In terms of applications, the HSC3006R8J is often used in simple voltage and current circuits. It is used as a voltage divider, for example, in order to create an output voltage that is proportional to the input voltage. It is also used to create a bias voltage in transistor amplifiers, by creating a constant voltage at the base of the transistor. Finally, it is often used as a current-limiting element in circuits, in order to protect other components from overcurrent damage.

The working principle of the HSC3006R8J is simple. The resistor works by dissipating electrical energy as heat, which is proportional to the current flowing through the resistor. This heat energy is dissipated in the form of infrared radiation that can be measured with a thermal imaging device. The amount of heat dissipated by the resistor depends on the value of the resistor, so it is important to select the correct value for the application.

The HSC3006R8J is an inexpensive chassis mount resistor which is popular due to its small size and wide range of resistance values. It is typically used in simple voltage and current circuits, such as voltage dividers and current-limiting elements. Its working principle is based on the conversion of electrical energy to heat, through infrared radiation. It is important to select the correct value for the application, as the heat generated by the resistor will depend on the value of the resistor.

The specific data is subject to PDF, and the above content is for reference