HSE18-P3A2BH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optical sensors can detect and measure physical or electrical properties in their surroundings and can be divided into two categories: Photoelectric and Industrial. Photoelectric sensors use optical radiation to detect input, while industrial sensors focus on the utilization of optical radiation to measure physical properties. The HSE18-P3A2BH is an example of a photoelectric sensor that is designed to detect and measure physical properties.

The HSE18-P3A2BH has a sensing range of up to 18mm and can detect objects using either visible or infrared light. It offers two different operating modes: Normally Open (NO) and Normally Closed (NC). In NO mode, the sensor output is normally high and will be switched to low when a target is detected. In NC mode, the output is normally low and will be switched to high when a target is detected. The HSE18-P3A2BH can also be used in conjunction with a photo reflector which will reflect incident light back to the sensor and allow it to detect changes in intensity.

The HSE18-P3A2BH uses a photoelectric transducer which is responsible for converting light energy into electrical energy. This transducer consists of a light emitting diode (LED) and a phototransistor. The LED emits a beam of light which is then received by the phototransistor. When a target enters the sensing range of the sensor, some of the light is reflected back to the phototransistor, changing the output voltage. Based on this change, the HSE18-P3A2BH is able to detect and measure the presence of a target.

The HSE18-P3A2BH is widely used in a variety of industrial, commercial and residential applications. In industrial applications, the sensor is used to detect objects, measure distances, detect motion, and count objects. In commercial applications, the sensor can be used as part of a security system to detect intruders. In residential applications, it can be used to detect and measure the presence of people, animals, and other objects.

The HSE18-P3A2BH is also used in medical applications. The sensor can detect and measure the presence of people for medical devices such as ventilators or infant monitors. It can also be used to detect the presence of liquids for medical diagnostic systems. The HSE18-P3A2BH can also detect and measure changes in temperature, making it useful for monitoring and controlling the environment of a healthcare facility.

The HSE18-P3A2BH is a robust, reliable, and easy to use optical sensor. It is designed to provide accurate and reliable measurements and its sensing range can be adjusted to meet specific requirements. It is also cost-effective and can be used in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference