HTSW-116-28-G-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The HTSW-116-28-G-T is a header part used for many applications, including mezzanine platforms, in which the header part is attached and soldered on top of the PCB in the platform. The header part is then plugged into the board, providing connections between the mezzanine platform and the rest of the system. This particular part has a basic structure of a two row of pins, each containing 28 contacts, with an overall pitch of 1.27mm between the pins.

To ensure the connection is secure, the HTSW-116-28-G-T requires specialized screws and nuts. These screws are in place to hold the header part in place and to prevent the connector from jostling or becoming loose from the application. Additionally, the use of the necessary screws and nuts helps to ensure a better electrical contact between the pins on the header part and the board. As such, the use of these screws also aids in ensuring the maximum voltage rating of the part is not exceeded.

In terms of electrical connections, the HTSW-116-28-G-T is able to support up to 28 AWG copper wire and is rated at 30 V DC. It also has a current rating of 1A per pin and an Insulation Resistance of 1,000MΩ min. Additionally, the contact resistance for the part is 3mΩ max and the temperature rating is -40°C to +105°C. Lastly, the part has a contact plating of either gold or tin, depending on the needs of the application.

The practical working principle of the HTSW-116-28-G-T header part is fairly straightforward. When the screws and nuts are tightened, they exert pressure against the contacts on the header part, creating a secure connection to the rest of the system. This pressure creates a good electrical connection between the header and the board, allowing for the proper operation of the overall mezzanine platform.

In conclusion, the HTSW-116-28-G-T is a header part typically used in mezzanine platforms that is designed to have 28 contact pins and a pitch of 1.27mm between the pins. The part requires specialized screws and nuts to maintain the connection securely and it can support up to 28 AWG copper wire, with a current rating of 1A per pin. It has an insulation resistance of 1,000MΩ min and contact resistance of 3mΩ max. The practical working principle of the HTSW-116-28-G-T header part is that it uses the pressure exerted through the screws and nuts to provide a good electrical contact between the header and board. This, in turn, provides for the correct operation of the mezzanine platform.

The specific data is subject to PDF, and the above content is for reference