HTSW-125-18-S-T

Rectangular connectors refer to a standard type of electrical connector that consists of two parallel rows of electrical contacts. They typically have long pins or blades arranged in two parallel rows on a 0.1-inch pitch and are a common form factor for many types of electronic equipment. The HTSW-125-18-S-T is a type of male pin rectangular connector that has been designed specifically for use in a wide variety of applications.

The HTSW-125-18-S-T male pin rectangular connector features 18 contacts arranged in two parallel rows on a 0.1-inch pitch. The contacts are rated at 1.5 amps each and the connector is rated for up to 250V. The overall dimensions of the connector are 2.125"L x 0.625"W x 0.5"H, and the connector can accept a mating female receptacle or housing with an IDC style ferruling. The connector is available in a wide variety of colors, including black, white, green, and red.

The HTSW-125-18-S-T male pin rectangular connector is designed for use in a variety of applications, such as networking, telecommunications, industrial control, and automotive. It is commonly used to connect wire-to-board components, such as cables, wires, resistors, capacitors, and other components. In addition, the connector is capable of withstanding a wide range of temperatures, from -20°C to +125°C.

The working principle of the HTSW-125-18-S-T male pin rectangular connector is straightforward. The male pins are inserted into the mating female receptacle or housing, and contact is made when a certain amount of force has been applied. This ensures that a secure connection is established, and the electrical properties of the connection are maintained. Once the connection is made, the pins or blades will remain in place, allowing the user to disconnect the connector at a later time if desired.

In summary, the HTSW-125-18-S-T male pin rectangular connector is a reliable and cost-effective solution for a wide variety of applications. It features 18 contacts arranged in two parallel rows on a 0.1-inch pitch, 1.5 amps rating, and up to 250V rating. The connector is designed to accept a mating female receptacle or housing with an IDC style ferruling, and its working principle is based on the insertion of the male pins into the mating female receptacle or housing.